Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index e738c56..448defa 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -22,14 +22,13 @@ */
#include <common.h> - +#include <config.h> /* If defined, override Linux identifiers with + * vendor specific ones */ #include <circbuf.h> #include <devices.h> #include "usbtty.h" #include "usb_cdc_acm.h" #include "usbdescriptors.h" -#include <config.h> /* If defined, override Linux identifiers with - * vendor specific ones */
#if 0 #define TTYDBG(fmt,args...)\ diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h index 71c47bc..2175d68 100644 --- a/drivers/serial/usbtty.h +++ b/drivers/serial/usbtty.h @@ -24,11 +24,11 @@ #ifndef __USB_TTY_H__ #define __USB_TTY_H__
-#include "usbdcore.h" +#include <usbdcore.h> #if defined(CONFIG_PPC) -#include "usbdcore_mpc8xx.h" +#include <usbdcore_mpc8xx.h> #elif defined(CONFIG_ARM) -#include "usbdcore_omap1510.h" +#include <usbdcore_omap1510.h> #endif
#include <version_autogenerated.h> @@ -36,14 +36,25 @@ /* If no VendorID/ProductID is defined in config.h, pretend to be Linux * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
+#ifndef CONFIG_USBD_VENDORID #define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */ +#endif +#ifndef CONFIG_USBD_PRODUCTID_GSERIAL #define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */ +#endif +#ifndef CONFIG_USBD_PRODUCTID_CDCACM #define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */ +#endif +#ifndef CONFIG_USBD_MANUFACTURER #define CONFIG_USBD_MANUFACTURER "Das U-Boot" +#endif +#ifndef CONFIG_USBD_PRODUCT_NAME #define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION +#endif
- +#ifndef CONFIG_USBD_CONFIGURATION_STR #define CONFIG_USBD_CONFIGURATION_STR "TTY via USB" +#endif
#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT #define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE diff --git a/drivers/usb/usbdcore_omap1510.c b/drivers/usb/usbdcore_omap1510.c index 4e3239f..fb8cb5d 100644 --- a/drivers/usb/usbdcore_omap1510.c +++ b/drivers/usb/usbdcore_omap1510.c @@ -1064,7 +1064,7 @@ void omap1510_udc_noniso_irq (void) */
/* Called to start packet transmission. */ -void udc_endpoint_write (struct usb_endpoint_instance *endpoint) +int udc_endpoint_write (struct usb_endpoint_instance *endpoint) { unsigned short epnum = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; @@ -1081,6 +1081,8 @@ void udc_endpoint_write (struct usb_endpoint_instance *endpoint) /* deselect the endpoint FIFO */ outw (UDC_EP_Dir | epnum, UDC_EP_NUM); } + + return 0; }
/* Start to initialize h/w stuff */ diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h index 526fcd9..ece0e95 100644 --- a/include/usbdcore_omap1510.h +++ b/include/usbdcore_omap1510.h @@ -168,8 +168,8 @@ #define UDC_IN_ENDPOINT 1 #define UDC_IN_PACKET_SIZE 64 #define UDC_INT_ENDPOINT 5 -#define UDC_INT_PKTSIZE 16 -#define UDC_BULK_PKTSIZE 16 +#define UDC_INT_PACKET_SIZE 16 +#define UDC_BULK_PACKET_SIZE 16
void udc_irq (void); /* Flow control */ @@ -177,7 +177,7 @@ void udc_set_nak(int epid); void udc_unset_nak (int epid);
/* Higher level functions for abstracting away from specific device */ -void udc_endpoint_write(struct usb_endpoint_instance *endpoint); +int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
int udc_init (void);