30 Jul
2013
30 Jul
'13
8:30 a.m.
Hi Rajdeep,
On 30/07/2013 08:16, Rajdeep Vaghasia wrote:
Hi Stefano, As in the case of NAND, u-boot_spl.bin is generated in u-boot/spl_nand/ directory,
You're wrong: spl_nand is the old legacy spl. It is maintained for old boards, but it should not be used for new projects.
Setting CONFIG_SPL, u-boot is generated into the spl/ directory. Please try to compile the boards I have mentioned - you can then check how production runs.
In case of NOR, where exactly the separate spl image will be generated? or Will "u-boot.bin" contain the whole "spl + secondary u-boot"?
No, but there is an option to concatenate automatically SPL and u-boot if desired.
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================