On Friday 15 May 2009 14:05:10 Weirich, Bernhard wrote:
I have installed u-boot v-2009.06-rc1 on my kilauea board (using BDI2000).
It boots but it stalls at line 716 in 4xx_pcie.c Even when I plug in a PCIe card it does not get any further. Are there any known issues with PCIe on the kilauea eval board?
No, not that I remember.
Am I doing anything wrong (although I cannot imagine what
4xx_pcie.c: /* poll for phy !reset */ 716 while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000)) 717 ;
The only idea I have is power supply. Are you using an ATX power supply? This is mandatory for PCIe IIRC. Other than this I have never heard of a board hanging in PCIe init without any card installed. Perhaps it's a HW problem on the board.
BTW: Did you test with an earlier U-Boot version? How did this work?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================