It will be easy to separate SD/EMMC when booting in SPL stage, then no need to bother which device is BOOT_DEVICE_MMC1/2.
Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/mach-imx/spl.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index f4a4617baf..dde1635a9d 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -189,6 +189,34 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) /* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */ u32 spl_boot_mode(const u32 boot_device) { +#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || defined(CONFIG_IMX8) + switch (get_boot_device()) { + /* for MMC return either RAW or FAT mode */ + case SD1_BOOT: + case SD2_BOOT: + case SD3_BOOT: +#if defined(CONFIG_SPL_FAT_SUPPORT) + return MMCSD_MODE_FS; +#else + return MMCSD_MODE_RAW; +#endif + break; + case MMC1_BOOT: + case MMC2_BOOT: + case MMC3_BOOT: +#if defined(CONFIG_SPL_FAT_SUPPORT) + return MMCSD_MODE_FS; +#elif defined(CONFIG_SUPPORT_EMMC_BOOT) + return MMCSD_MODE_EMMCBOOT; +#else + return MMCSD_MODE_RAW; +#endif + break; + default: + puts("spl: ERROR: unsupported device\n"); + hang(); + } +#else /* * When CONFIG_SPL_FORCE_MMC_BOOT is defined the 'boot_device' is used * unconditionally to decide about device to use for booting. @@ -217,6 +245,7 @@ u32 spl_boot_mode(const u32 boot_device) puts("spl: ERROR: unsupported device\n"); hang(); } +#endif } #endif