Hi Ziyuan, Simon,
On 05/20/2017 10:29 AM, Simon Glass wrote:
Hi Ziyuan,
On 8 May 2017 at 01:01, Ziyuan xzy.xu@rock-chips.com wrote:
hi simon,
I need to achieve emmc_phy physical address in driver, so that I can configure phy in different scenarios (phy register address should be 0xff77f780). see below: sdhci: sdhci@fe330000 {
phys = <&emmc_phy>; phy-names = "phy_arasan"; }; grf: syscon@ff770000 { reg = <0x0 0xff770000 0x0 0x10000>; emmc_phy: phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; reg = <0xf780 0x24>; #phy-cells = <0>; status = "disabled"; }; };AKA, I can't use libfdt if OF_PLATDATA is enabled, so how to get it?
At present this is not supported. I'm not quite sure how to support it, or at least the best way. Do you have ideas on what the C structure should be for this?
I don't know how much operation for grf access is needed in SPL,
but I think driver in SPL should be simple, and OF_PLATDATA is also for
reduce memory size requirement in SPL. If operation is not much, can we
just use the GRF base address directly when OF_PLATDATA enabled? just
like other GRF access in SPL on different board files.
Thanks, - Kever
Regards, Simon