út 23. 2. 2021 v 14:53 odesílatel Michal Simek michal.simek@xilinx.com napsal:
From: Amit Kumar Mahapatra amit.kumar-mahapatra@xilinx.com
Update the following device tree properties for nand flash
- Set software ecc mode.
- Set bch as ecc algo.
- Set read block to 0.
Signed-off-by: Amit Kumar Mahapatra amit.kumar-mahapatra@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index 92d938d665d2..3204456e6451 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -124,6 +124,10 @@ reg = <0x0>; #address-cells = <0x2>; #size-cells = <0x1>;
nand-ecc-mode = "soft";nand-ecc-algo = "bch";nand-rb = <0>;label = "main-storage-0"; partition@0 { /* for testing purpose */ label = "nand-fsbl-uboot";@@ -154,6 +158,10 @@ reg = <0x1>; #address-cells = <0x2>; #size-cells = <0x1>;
nand-ecc-mode = "soft";nand-ecc-algo = "bch";nand-rb = <0>;label = "main-storage-1"; partition@0 { /* for testing purpose */ label = "nand1-fsbl-uboot";-- 2.30.0
Applied. M