On Wed, Aug 7, 2019 at 11:39 AM Fabio Estevam festevam@gmail.com wrote:
On Wed, Aug 7, 2019 at 1:36 PM Adam Ford aford173@gmail.com wrote:
With spl_early_init() now enabled in board_init_f, the preloader_console_init() function can correctly initialize the serial port based on the device tree during SPL. This patch enables DM_SERIAL in both U-Boot and SPL.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index b95c9783a4..2c77b9c218 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x2000
Unrelated change?
It appears to be an artifact of the make savedefconfig. Newer updates make CONFIG_SYS_MALLOC_F_LEN=0x2000 by default, so savedefconfig just removed it. I will do a V2 patch serial splitting the first patch into two separate parts, then I'll remove this artifact from the 2nd patch.
adam