To be able to use FEL booting (Allwinner's USB-OTG protocol), we need a 32 bit SPL, to easily return into the 32 bit BootROM. Add two generic defconfigs for that purpose, one for boards with DDR3 DRAM, the other for those with LPDDR3 DRAM chips. The resulting spl/sunxi-spl.bin can be used with the sunxi-fel tool to initialise the DRAM via FEL. This allows to load the normal versions for the rest of the firmware components (ATF, 64 bit U-Boot proper). This SPL will determine the architecture of the loaded binaries and will switch the bitness if necessary.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- configs/sun50i-a64-ddr3-spl_defconfig | 13 +++++++++++++ configs/sun50i-a64-lpddr3-spl_defconfig | 17 +++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 configs/sun50i-a64-ddr3-spl_defconfig create mode 100644 configs/sun50i-a64-lpddr3-spl_defconfig
diff --git a/configs/sun50i-a64-ddr3-spl_defconfig b/configs/sun50i-a64-ddr3-spl_defconfig new file mode 100644 index 0000000000..fda15e2491 --- /dev/null +++ b/configs/sun50i-a64-ddr3-spl_defconfig @@ -0,0 +1,13 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_SUNXI_ARMV8_32BIT_BUILD=y +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" +CONFIG_SPL_SPI_SUNXI=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 diff --git a/configs/sun50i-a64-lpddr3-spl_defconfig b/configs/sun50i-a64-lpddr3-spl_defconfig new file mode 100644 index 0000000000..20bc376cbd --- /dev/null +++ b/configs/sun50i-a64-lpddr3-spl_defconfig @@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_SUNXI_ARMV8_32BIT_BUILD=y +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=3881949 +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-lts" +CONFIG_MMC0_CD_PIN="" +CONFIG_SPL_SPI_SUNXI=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2