Hi Fabio,
On Wed, 6 Sep 2017 13:49:31 -0300 Fabio Estevam festevam@gmail.com wrote:
From: Fabio Estevam fabio.estevam@nxp.com
MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz.
When running a SPL target, which supports multiple MX6 variants we cannot properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as such decision is done in build-time currently.
Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be configured in run-time on mx6.
Reported-by: Eric Nelson eric@nelint.com Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
Changes since v1:
- Improve the mx6 detection logic (Troy)
drivers/video/ipu_common.c | 14 +++++++++++++- include/configs/advantech_dms-ba16.h | 1 - include/configs/apalis_imx6.h | 1 - include/configs/aristainetos-common.h | 1 - include/configs/cgtqmx6eval.h | 4 ---- include/configs/cm_fx6.h | 1 - include/configs/colibri_imx6.h | 1 - include/configs/embestmx6boards.h | 1 - include/configs/ge_bx50v3.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/imx6-engicam.h | 1 - include/configs/m53evk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53cx9020.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx6cuboxi.h | 1 - include/configs/mx6sabre_common.h | 5 ----- include/configs/nitrogen6x.h | 1 - include/configs/novena.h | 1 - include/configs/tbs2910.h | 1 - include/configs/wandboard.h | 1 - scripts/config_whitelist.txt | 1 - 22 files changed, 13 insertions(+), 29 deletions(-)
Applied to u-boot-video/master after fixing cgtqmx6eval build. Thanks!
...
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 4996a89..6a6c063 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -87,10 +87,6 @@ #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO -#ifdef CONFIG_MX6DL -#define CONFIG_IPUV3_CLK 198000000 -#else -#define CONFIG_IPUV3_CLK 264000000 #endif
dropped this #endif.
Thanks,
Anatolij