Hi Folks

Been working on getting u-boot's reset command to work correctly on my RPXlite.  Kept on getting bus failures around line 181 of cpu/mpc8xx/cpu_init.c (version 1.1.1).   I finally tried commenting out the following lines (figuring that I wasn't an 850 and wasn't rev A silicon) and am now able to perform a reset successfully at u-boot's command prompt.

  /**************************************************************
   * The following causes the RPXlite 823 with rev b2(?) silicon
   * to generate a bus fault when executing u-boot reset command.

  /* perform BR0 reset that MPC850 Rev. A can't guarantee *
  reg = memctl->memc_br0;
  reg &= BR_PS_MSK;     /* Clear everything except Port Size bits *
  reg |= BR_V;          /* then add just the "Bank Valid" bit     *
  memctl->memc_br0 = reg;
 
  ***************************************************************/

Regards,
John Miller