U-Boot includes a SPI emulation driver already but it is not explicit, and is hidden in the SPI flash code.
Conceptually with sandbox's SPI implementation we have a layer which creates SPI bus transitions and a layer which interprets them, currently only for SPI flash. The latter is actually an emulation, and it should be possible to add more than one emulation - not just SPI flash.
Add a SPI emulation uclass so that other emulations can be plugged in to support different types of emulated devices on difference buses/chip selects.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/spi/Makefile | 1 + drivers/spi/spi-emul-uclass.c | 15 +++++++++++++++ include/dm/uclass-id.h | 1 + include/spi.h | 30 ++++++++++++++++++++++++++++++ 4 files changed, 47 insertions(+) create mode 100644 drivers/spi/spi-emul-uclass.c
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index d1f1dd0..a1de028 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -8,6 +8,7 @@ # There are many options which enable SPI, so make this library available ifdef CONFIG_DM_SPI obj-y += spi-uclass.o +obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o else obj-y += spi.o endif diff --git a/drivers/spi/spi-emul-uclass.c b/drivers/spi/spi-emul-uclass.c new file mode 100644 index 0000000..b436a0e --- /dev/null +++ b/drivers/spi/spi-emul-uclass.c @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <spi.h> +#include <spi_flash.h> + +UCLASS_DRIVER(spi_emul) = { + .id = UCLASS_SPI_EMUL, + .name = "spi_emul", +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 8207483..dce405e 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -18,6 +18,7 @@ enum uclass_id { UCLASS_TEST, UCLASS_TEST_FDT, UCLASS_TEST_BUS, + UCLASS_SPI_EMUL, /* sandbox SPI device emulator */
/* U-Boot uclasses start here */ UCLASS_GPIO, /* Bank of general-purpose I/O pins */ diff --git a/include/spi.h b/include/spi.h index b5e9347..d00a60b 100644 --- a/include/spi.h +++ b/include/spi.h @@ -423,6 +423,35 @@ struct dm_spi_ops { int (*set_mode)(struct udevice *device, uint mode); };
+struct dm_spi_emul_ops { + /** + * SPI transfer + * + * This writes "bitlen" bits out the SPI MOSI port and simultaneously + * clocks "bitlen" bits in the SPI MISO port. That's just the way SPI + * works. Here the device is a slave. + * + * The source of the outgoing bits is the "dout" parameter and the + * destination of the input bits is the "din" parameter. Note that + * "dout" and "din" can point to the same memory location, in which + * case the input data overwrites the output data (since both are + * buffered by temporary variables, this is OK). + * + * spi_xfer() interface: + * @slave: The SPI slave which will be sending/receiving the data. + * @bitlen: How many bits to write and read. + * @dout: Pointer to a string of bits sent to the device. The + * bits are held in a byte array and are sent MSB first. + * @din: Pointer to a string of bits that will be sent back to + * the master. + * @flags: A bitwise combination of SPI_XFER_* flags. + * + * Returns: 0 on success, not -1 on failure + */ + int (*xfer)(struct udevice *device, unsigned int bitlen, + const void *dout, void *din, unsigned long flags); +}; + int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp, struct udevice **devp);
@@ -443,6 +472,7 @@ int sandbox_spi_get_emul(struct sandbox_state *state,
/* Access the serial operations for a device */ #define spi_get_ops(dev) ((struct dm_spi_ops *)(dev)->driver->ops) +#define spi_emul_get_ops(dev) ((struct dm_spi_emul_ops *)(dev)->driver->ops) #endif /* CONFIG_DM_SPI */
#endif /* _SPI_H_ */