Hi, Voice
On 9/10/2012 4:07 PM, Bo Shen wrote:
Hi Josh,
On 9/7/2012 18:39, Josh Wu wrote:
Signed-off-by: Josh Wu josh.wu@atmel.com
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 13 +++++++++++++ board/atmel/at91sam9x5ek/at91sam9x5ek.c | 16 ++++++++++++++++ include/configs/at91sam9x5ek.h | 8 ++++++++ 3 files changed, 37 insertions(+)
I think add MCI1 support at the same time will be better. Otherwise,
Acked-by: voice.shen@atmel.com Tested-by: voice.shen@atmel.com
Thanks for the testing. If this patch will be accepted. then I will add MCI1 support in later patch.
Best Regards, Josh Wu
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 6d77219..3608e7c 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -230,3 +230,16 @@ void at91_macb_hw_init(void) #endif } #endif
+#if defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{
- /* Initialize the MCI0 */
- at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */
- at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */
- at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */
- at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */
- at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */
+} +#endif diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 06028aa..d1f05ef 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -42,6 +42,9 @@ #ifdef CONFIG_ATMEL_SPI #include <spi.h> #endif +#ifdef CONFIG_GENERIC_ATMEL_MCI +#include <mmc.h> +#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -258,6 +261,19 @@ void spi_cs_deactivate(struct spi_slave *slave) } #endif /* CONFIG_ATMEL_SPI */
+#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{
- /* Enable clock */
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
- at91_mci_hw_init();
- return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
+} +#endif
- int board_early_init_f(void) { at91_seriald_hw_init();
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 1ceb31a..974e08f 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -136,6 +136,14 @@ #define CONFIG_CMD_UBIFS #endif
+/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_DOS_PARTITION
- /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII