From: Steffen Dirkwinkel s.dirkwinkel@beckhoff.com
Enable DM_VIDEO in config and don't overwrite console so it can be set from environment
Acked-by: Patrick Bruenn p.bruenn@beckhoff.com Signed-off-by: Steffen Dirkwinkel s.dirkwinkel@beckhoff.com ---
board/beckhoff/mx53cx9020/Makefile | 2 +- board/beckhoff/mx53cx9020/mx53cx9020.c | 11 ----- board/beckhoff/mx53cx9020/mx53cx9020_video.c | 51 +++++++++----------- configs/mx53cx9020_defconfig | 5 +- include/configs/mx53cx9020.h | 6 +-- 5 files changed, 28 insertions(+), 47 deletions(-)
diff --git a/board/beckhoff/mx53cx9020/Makefile b/board/beckhoff/mx53cx9020/Makefile index 423a5532ca6..7f15fc5746d 100644 --- a/board/beckhoff/mx53cx9020/Makefile +++ b/board/beckhoff/mx53cx9020/Makefile @@ -4,4 +4,4 @@ # Patrick Bruenn p.bruenn@beckhoff.com
obj-y += mx53cx9020.o -obj-$(CONFIG_VIDEO) += mx53cx9020_video.o +obj-$(CONFIG_DM_VIDEO) += mx53cx9020_video.o diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c index 79ea4560283..fdef4477d9a 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c @@ -23,8 +23,6 @@ #include <mmc.h> #include <fsl_esdhc.h> #include <asm/gpio.h> -#include <linux/fb.h> -#include <ipu_pixfmt.h> #include <input.h> #include <fs.h> #include <dm/platform_data/serial_mxc.h> @@ -232,15 +230,6 @@ int board_early_init_f(void) return 0; }
-/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - int board_init(void) { gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c index 85f1cdae8af..bf472902562 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020_video.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c @@ -8,29 +8,34 @@ */
#include <common.h> -#include <linux/list.h> -#include <asm/gpio.h> #include <asm/arch/iomux-mx53.h> -#include <linux/fb.h> -#include <ipu_pixfmt.h> +#include <asm/gpio.h> +#include <asm/mach-imx/video.h>
#define CX9020_DVI_PWD IMX_GPIO_NR(6, 1)
-static struct fb_videomode const vga_640x480 = { - .name = "VESA_VGA_640x480", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, /* picosecond (25.175 MHz) */ - .left_margin = 40, - .right_margin = 60, - .upper_margin = 10, - .lower_margin = 10, - .hsync_len = 20, - .vsync_len = 10, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -}; +struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = NULL, + .mode = { + .name = "DVI", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, /* picosecond (25.175 MHz) */ + .left_margin = 40, + .right_margin = 60, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; +size_t display_count = ARRAY_SIZE(displays);
void setup_iomux_lcd(void) { @@ -39,11 +44,3 @@ void setup_iomux_lcd(void) gpio_request(CX9020_DVI_PWD, "CX9020_DVI_PWD"); gpio_direction_output(CX9020_DVI_PWD, 1); } - -int board_video_skip(void) -{ - const int ret = ipuv3_fb_init(&vga_640x480, 0, IPU_PIX_FMT_RGB24); - if (ret) - printf("VESA VG 640x480 cannot be configured: %d\n", ret); - return ret; -} diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index 93c113aba73..11b414f790e 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -33,6 +33,5 @@ CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX5=y CONFIG_MXC_UART=y -CONFIG_VIDEO=y -CONFIG_VIDEO_IPUV3=y -# CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_DM_VIDEO=y +CONFIG_VIDEO_IPUV3=y \ No newline at end of file diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index 1e3ea88b77a..66a0f319c45 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -160,11 +160,7 @@ #define CONFIG_SYS_MMC_ENV_DEV 0
/* Framebuffer and LCD */ +#define CONFIG_IMX_VIDEO_SKIP #define CONFIG_PREBOOT -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO
#endif /* __CONFIG_H */