Hi Jean, First of all sorry for late feedback Thanks for your help. I tried to apply the above patch but it has lot of diff, On the other thread I have migrated to latest u-boot version and the problem got resolved :-) I think your patch is mainlined.
But I am facing now new problem... The earlier I was using u-boot ver 1.1.6 and my nand driver was working fine. With migration to latest u-boot I am always getting bad block errors (Skipping bad block 0x????)
What could be the problem?
Regards.. Prafulla. .
-----Original Message----- From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj@jcrosoft.com] Sent: Sunday, November 23, 2008 5:57 AM To: Prafulla Wadaskar; u-boot@lists.denx.de Subject: Re: [U-Boot] U-boot build failes witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)
On 13:06 Wed 19 Nov , Jean-Christophe PLAGNIOL-VILLARD wrote:
On 03:10 Wed 19 Nov , Prafulla Wadaskar wrote:
Hi I am using u-boot-1.1.6 and building u-boot from my new
board which
includes nand flash support
If I build using armv5tel-reghat-linux-gnueabi-gcc
(4.1.2) toolchain
it gives build failure with below log
--start-grouplib_generic/libgeneric.a board/Marvell/rd6281/librd6281.a cpu/arm926ejs/libarm926ejs.a cpu/arm926ejs/feroceon/libferoceon.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --end-group -L /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2 -lgcc \
-Map u-boot.map -o u-boot/usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_div
di3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
/usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_udi
vdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
make: *** [u-boot] Error 1
Whereas, If I build the same code using codesoucery toolchain
(arm2008q1) release (gcc ver 4.2.3) the build is sucessfull.
I want to go ahead with armv5tel-reghat-linux-gnueabi-gcc (4.1.2) Can someone suggest what is problem and how should I proceed?
update the divdi3 and _udivdi3 implementation
I'll said
so please try this patch
please note I've just test it on one board
Best Regards, J.
Any news?
Best Regards, J.