31 Jan
2023
31 Jan
'23
10:50 a.m.
When an I2C clock is enabled inside enable_i2c_clk() the clock rate is configured as PLL_SYS_MAIN_120M_CLK / 2 = 60MHz. Currently, the I2C clock is retrieved from I2C1_CLK_ROOT, which may not be the one that was enabled. As there is no clock driver for the imx7d, it is better to return 60MHz for the I2C clock. This provides a workaround for the imx7d-pico board, where I2C4 is connected to the PMIC. With this change, it is possible to convert the imx7d-pico board to DM_I2C and DM_PMIC. Signed-off-by: Fabio Estevam festevam@denx.de
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================