On Thu, Aug 26, 2004 at 06:44:10PM +0200, Wolfgang Denk wrote:
No. For U-Boot the reference is always the value of the "ethaddr" envrionment variable.
Ah, I probably didn't explain it too well :( "ethaddr" envrionment variable still exist, but it's not stored together with other variables, but in smc's eeprom itself (so it's not stored in two different places)
That feature is configurable (eeprom is optional and smc can be told not to use it). Are you interested in patch?
allow U-Boot and (for example) Linux to boot with different mac address? Why?
Normally no user is supposed to touch or modify the MAC address. That's why it's value in the default configuration is read-only after being set. It gets set once during production (or automagically at first boot) and then never changes.
My point is exactly the same. After board is manufactured, it is put into automatic tester which writes mac address (basicaly it is computer hooked to serial line and some other signals for diagnostic) by issuing setenv ethaddr command. This command stores mac address directly into eeprom, not into the same space as other variables are stored (NOR flash)
Now _if_ you configure U-Boot to allow overwriting the setting, then you are supposed to know what you are doing, and we will not limit you. You may have a special purpose of doing exactly this. If you don't like this, then don't do it.
Once set, overwriting mac address is allowed, but it is password protected. That way unexperienced user is not able to change it, but service technician is.
"UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things." - Doug Gwyn
:)
Regards, ladis