On Saturday, January 18, 2014 at 09:06:29 PM, Jagannadha Sutradharudu Teki wrote:
- Shrink spi_slave {}
- Shrink spi_flash_params {}
- Documentation for sf features
Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com Cc: Marek Vasut marex@denx.de
doc/SPI/README.sf-features | 122 ++++++++++++++++++++++++++++++ drivers/mtd/spi/sf.c | 4 +- drivers/mtd/spi/sf_internal.h | 1 - drivers/mtd/spi/sf_ops.c | 8 +- drivers/mtd/spi/sf_params.c | 172 +++++++++++++++++++++--------------------- drivers/mtd/spi/sf_probe.c | 71 ++++++++--------- include/spi.h | 42 ++++------- include/spi_flash.h | 24 +++--- 8 files changed, 270 insertions(+), 174 deletions(-) create mode 100644 doc/SPI/README.sf-features
diff --git a/doc/SPI/README.sf-features b/doc/SPI/README.sf-features new file mode 100644 index 0000000..d35f56d --- /dev/null +++ b/doc/SPI/README.sf-features @@ -0,0 +1,122 @@ +SPI FLASH feature enhancements: +==============================
+This document describes how to extend the current data structures in spi subsystem +for making use of new flash features/operations w.r.t to controller driver support. + +1. spi_slave:
+struct spi_slave {
- ..........
- u32 mode_bits;
- ........
+};
+@mode_bits can be used to expose the SPI RX/TX operation modes, bus options and +few flags which are used to extended the flash specific features/operations +- include/spi.h
+mode_bits: +- SPI_TX_QPP: 4-Wire tx transfer operation quad page program +- SPI_RX_SLOW: 1-wire rx transfer operation array slow read +- SPI_RX_DUAL: 2-wire rx transfer operation dual fast read +- SPI_RX_DUAL_IO: 2-wire rx transfer operation dual io fast read +- SPI_RX_QUAD: 4-wire rx transfer operation quad fast read +- SPI_RX_QUAD_IO: 4-wire rx transfer operation quad io fast read +- SPI_SHARED: dual flash devices are connected in shared bus connection +- SPI_SEPARATED: dual flash devices are connected in separate bus connection +- SPI_U_PAGE: select the upper flash in dual flash shared bus connection [1] +
A generic SPI controller _does_ _not_ _care_ about any SPI flash crud. The SPI bus controller (which is what this is for) and SPI-NOR controller are two different things and must have two different slave structures.