Re: [U-Boot] [PATCH 3/3] board: popmetal: enable the usb host port power in board init

Hi Kever,

On 9 November 2016 at 00:30, Kever Yang kever.yang@rock-chips.com wrote:

Enable the usb host port 5V power by enable the fix regulator. The PopMetal board have a on board FE1.1 usb 2.0 hub which connect to the usb host port, we need to de-assert its reset pin at the same time.

This should go in a USB driver.

Signed-off-by: Kever Yang kever.yang@rock-chips.com

board/chipspark/popmetal_rk3288/popmetal-rk3288.c | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+)

Regards, Simon