Hi Lukasz,
On 27 July 2018 at 15:26, Lukasz Majewski lukma@denx.de wrote:
On Fri, 27 Jul 2018 14:42:32 +0530 Anand Moon linux.amoon@gmail.com wrote:
Hi Lukasz,
On 27 July 2018 at 13:54, Lukasz Majewski lukma@denx.de wrote:
On Fri, 27 Jul 2018 08:34:15 +0530 Anand Moon linux.amoon@gmail.com wrote:
Hi Lukasz,
On 26 July 2018 at 21:23, Lukasz Majewski lukma@denx.de wrote:
Hi Anand,
Hi Lukasz,
On 26 July 2018 at 03:55, Lukasz Majewski lukma@denx.de wrote: > This commit allows by default booting Odroid XU3 from the SD > card (when e.g. eMMC module is not present). > > Signed-off-by: Lukasz Majewski lukma@denx.de > > --- > > include/configs/odroid_xu3.h | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/include/configs/odroid_xu3.h > b/include/configs/odroid_xu3.h index > f495f6219ba9..818a06515cb2 100644 --- > a/include/configs/odroid_xu3.h +++ > b/include/configs/odroid_xu3.h @@ -94,6 +94,9 @@ > #undef CONFIG_SYS_BOARD > #define CONFIG_SYS_BOARD "odroid" > > +#undef CONFIG_SYS_MMC_ENV_DEV > +#define CONFIG_SYS_MMC_ENV_DEV 2 > + > /* Define new extra env settings, including DFU settings */ > #undef CONFIG_EXTRA_ENV_SETTINGS > #define CONFIG_EXTRA_ENV_SETTINGS \ > @@ -105,8 +108,8 @@ > "console=" CONFIG_DEFAULT_CONSOLE "\0"\ > "fdtfile=exynos5422-odroidxu3.dtb\0" \ > "boardname=odroidxu3\0" \ > - "mmcbootdev=0\0" \ > - "mmcrootdev=0\0" \ > + "mmcbootdev=2\0" \ > + "mmcrootdev=1\0" \ > "mmcbootpart=1\0" \ > "mmcrootpart=2\0" \ > "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ > -- > 2.11.0 >
This changes probably breaks the booting from eMMC on Odroid-XU4
I suppose, that XU4 is also equipped with SD card slot as XU3.
Nonetheless, as I don't have eMMC card for mine XU3, the only way to boot my device is SD card.
If you believe that this may be a problem, then I can drop this patch.
Have you checked patches from 1-8? Does it work for you? If yes, please send tested-by tag.
Yes you probably need to drop this patch, I had some tough time recovering my eMMC back to flash new u-boot.
I have tested my eMMC with default boot.scr its boot good. Need to modify the boot.scr to boot into SD card.
SD card has different layout than eMMC.
Despite above - you just shall need to apply patch 9/9 to get the board running from SD card.
Actually SD card are easy to modify and tune with just adding setenv mmcrootdev "1" to autoboot.cmd from sdcard.
but with eMMC module it's bit difficult to make this work,
Ach.... Ok, I see
The problem is when you have both attached - the eMMC and SD card.
In that case I always thought that one shall boot from eMMC and the SD card shall be used as an extra storage space.
Also, please keep in mind that IIRC the ROM first tries to boot from eMMC, so you need BL1, u-boot placed there if it is present.
Can we create a different board initialization file to fine tune the odroid xu3 platform. for example Odroid U3 has # board/samsung/odroid/odroid.c
where we can initialize for Odroid XU3 platform boards with following features. board_clock_init board_gpio_init exynos_power_init board_usb_init board_leds
Best Regards -Anand