Re: [U-Boot-Users] mpc8245 changed from u-boot-1.0.0 to uboot-1.0.2

Matthew S. McClintock wrote:

Hi all,

I've run into a problem on our board with the latest u-boot-1.0.2. Prior to this problem u-boot-1.0.0 worked flawlessly. So I am assuming the problem is from a change between those two versions.

The problem is pretty simple, when u-boot is copying itself from flash to ram it does not get copied correctly. If I step through the copying of u-boot from flash to ram it copies fine, however if I let it copy at full speed it does not get copied correctly....

I've used U-Boot on the Artis SBC-A3000, which is based on the MPC8245. I downloaded U-Boot 1.0.2 and compiled it with ELDK 2.0.2. I was unable to recreate this problem--the board boots and starts Linux with no apparent problems.

-Robert