From: Kishon Vijay Abraham I kishon@ti.com
Instead of sending STOP TRANSMISSION command from MMC core, enable the auto command feature so that the Host Controller issues CMD12 automatically when last block transfer is completed.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com --- drivers/mmc/omap_hsmmc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 3cac6ea..fcda0e2 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -492,6 +492,10 @@ static int omap_hsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, ulong start;
mmc_base = priv->base_addr; + + if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) + return 0; + start = get_timer(0); while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -548,7 +552,7 @@ static int omap_hsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, if (data) { if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) { - flags |= (MSBS_MULTIBLK | BCE_ENABLE); + flags |= (MSBS_MULTIBLK | BCE_ENABLE | ACEN_ENABLE); data->blocksize = 512; writel(data->blocksize | (data->blocks << 16), &mmc_base->blk);