8 Oct
2015
8 Oct
'15
10:25 p.m.
On 08/10/15 12:24 PM, Fabio Estevam wrote:
Hi Peng,
On a mx6qp sabreauto I noticed that the board hangs after doing:
=> saveenv => reset
U-Boot 2015.10-rc4-24385-ge04e21c-dirty (Oct 08 2015 - 13:08:54 -0300)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 38C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND:
(hangs here)
Any ideas?
Now, is this before or after our recent reset revert ?
Regards Sinan Akman