DM_SPI and other driver model migration deadlines are expired for this board.
Remove it.
Patch-cc: Xiaobo Xie xiaobo.xie@nxp.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com Reviewed-by: Priyanka Jain priyanka.jain@nxp.com --- arch/powerpc/cpu/mpc85xx/Kconfig | 5 - board/freescale/p1_twr/Kconfig | 12 - board/freescale/p1_twr/MAINTAINERS | 6 - board/freescale/p1_twr/Makefile | 9 - board/freescale/p1_twr/ddr.c | 69 ----- board/freescale/p1_twr/law.c | 15 - board/freescale/p1_twr/p1_twr.c | 292 ------------------ board/freescale/p1_twr/tlb.c | 75 ----- configs/TWR-P1025_defconfig | 64 ---- include/configs/p1_twr.h | 480 ----------------------------- 10 files changed, 1027 deletions(-) delete mode 100644 board/freescale/p1_twr/Kconfig delete mode 100644 board/freescale/p1_twr/MAINTAINERS delete mode 100644 board/freescale/p1_twr/Makefile delete mode 100644 board/freescale/p1_twr/ddr.c delete mode 100644 board/freescale/p1_twr/law.c delete mode 100644 board/freescale/p1_twr/p1_twr.c delete mode 100644 board/freescale/p1_twr/tlb.c delete mode 100644 configs/TWR-P1025_defconfig delete mode 100644 include/configs/p1_twr.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 9801055e54..753d0750b2 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -188,10 +188,6 @@ config TARGET_P2020RDB imply CMD_SATA imply SATA_SIL
-config TARGET_P1_TWR - bool "Support p1_twr" - select ARCH_P1025 - config TARGET_P2041RDB bool "Support P2041RDB" select ARCH_P2041 @@ -1512,7 +1508,6 @@ source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" -source "board/freescale/p1_twr/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig" source "board/freescale/t102xrdb/Kconfig" diff --git a/board/freescale/p1_twr/Kconfig b/board/freescale/p1_twr/Kconfig deleted file mode 100644 index 8f9a8d4415..0000000000 --- a/board/freescale/p1_twr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P1_TWR - -config SYS_BOARD - default "p1_twr" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "p1_twr" - -endif diff --git a/board/freescale/p1_twr/MAINTAINERS b/board/freescale/p1_twr/MAINTAINERS deleted file mode 100644 index 0f9f98f459..0000000000 --- a/board/freescale/p1_twr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -P1_TWR BOARD -M: Xiaobo Xie xiaobo.xie@nxp.com -S: Maintained -F: board/freescale/p1_twr/ -F: include/configs/p1_twr.h -F: configs/TWR-P1025_defconfig diff --git a/board/freescale/p1_twr/Makefile b/board/freescale/p1_twr/Makefile deleted file mode 100644 index 5e6c658551..0000000000 --- a/board/freescale/p1_twr/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2013 Freescale Semiconductor, Inc. -# - -obj-y += p1_twr.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c deleted file mode 100644 index 85f1f6344a..0000000000 --- a/board/freescale/p1_twr/ddr.c +++ /dev/null @@ -1,69 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <vsprintf.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/processor.h> -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> -#include <asm/io.h> -#include <asm/fsl_law.h> - -/* Fixed sdram init -- doesn't use serial presence detect. */ -phys_size_t fixed_sdram(void) -{ - sys_info_t sysinfo; - char buf[32]; - size_t ddr_size; - fsl_ddr_cfg_regs_t ddr_cfg_regs = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, -#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2, -#endif - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL, - .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 - }; - - get_sys_info(&sysinfo); - printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freq_ddrbus)); - - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - ddr_size, LAW_TRGT_IF_DDR_1) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - }; - - return ddr_size; -} diff --git a/board/freescale/p1_twr/law.c b/board/freescale/p1_twr/law.c deleted file mode 100644 index 45721f6140..0000000000 --- a/board/freescale/p1_twr/law.c +++ /dev/null @@ -1,15 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_SSD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC) -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c deleted file mode 100644 index 8e1522a604..0000000000 --- a/board/freescale/p1_twr/p1_twr.c +++ /dev/null @@ -1,292 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <hwconfig.h> -#include <image.h> -#include <init.h> -#include <net.h> -#include <pci.h> -#include <i2c.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/io.h> -#include <asm/fsl_law.h> -#include <asm/fsl_lbc.h> -#include <asm/mp.h> -#include <miiphy.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <fsl_mdio.h> -#include <tsec.h> -#include <ioports.h> -#include <asm/fsl_serdes.h> -#include <netdev.h> - -#define SYSCLK_64 64000000 -#define SYSCLK_66 66666666 - -unsigned long get_board_sys_clk(ulong dummy) -{ - ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - par_io_t *par_io = (par_io_t *) &(gur->qe_par_io); - unsigned int cpdat_val = 0; - - /* Set-up up pin muxing based on board switch settings */ - cpdat_val = par_io[1].cpdat; - - /* Check switch setting for SYSCLK select (PB3) */ - if (cpdat_val & 0x10000000) - return SYSCLK_64; - else - return SYSCLK_66; - - return 0; -} - -#ifdef CONFIG_QE - -#define PCA_IOPORT_I2C_ADDR 0x23 -#define PCA_IOPORT_OUTPUT_CMD 0x2 -#define PCA_IOPORT_CFG_CMD 0x6 - -const qe_iop_conf_t qe_iop_conf_tab[] = { - -#ifdef CONFIG_TWR_P1025 - /* GPIO */ - {1, 0, 1, 0, 0}, - {1, 18, 1, 0, 0}, - - /* GPIO for switch options */ - {1, 2, 2, 0, 0}, /* PROFIBUS_MODE_SEL */ - {1, 3, 2, 0, 0}, /* SYS_CLK_SELECT */ - {1, 29, 2, 0, 0}, /* LOCALBUS_QE_MUXSEL */ - {1, 30, 2, 0, 0}, /* ETH_TDM_SEL */ - - /* QE_MUX_MDC */ - {1, 19, 1, 0, 1}, /* QE_MUX_MDC */ - - /* QE_MUX_MDIO */ - {1, 20, 3, 0, 1}, /* QE_MUX_MDIO */ - - /* UCC_1_MII */ - {0, 23, 2, 0, 2}, /* CLK12 */ - {0, 24, 2, 0, 1}, /* CLK9 */ - {0, 7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2 */ - {0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ - {0, 6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ - {0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ - {0, 5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 13, 1, 0, 2}, /* ENET1_TX_ER */ - {0, 4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B */ - {0, 8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B */ - {0, 17, 2, 0, 2}, /* ENET1_CRS */ - {0, 16, 2, 0, 2}, /* ENET1_COL */ - - /* UCC_5_RMII */ - {1, 11, 2, 0, 1}, /* CLK13 */ - {1, 7, 1, 0, 2}, /* ENET5_TXD0_SER5_TXD0 */ - {1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1 */ - {1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0 */ - {1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1 */ - {1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B */ - {1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B */ - {1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B */ - - /* TDMA - clock option is configured in OS based on board setting */ - {1, 23, 2, 0, 2}, /* TDMA_TXD */ - {1, 25, 2, 0, 2}, /* TDMA_RXD */ - {1, 26, 1, 0, 2}, /* TDMA_SYNC */ -#endif - - {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ -}; -#endif - -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP)); - - /* SDHC_DAT[4:7] not exposed to pins (use as SPI) */ - clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); - - return 0; -} - -int checkboard(void) -{ - ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u8 boot_status; - - printf("Board: %s\n", CONFIG_BOARDNAME); - - boot_status = ((gur->porbmsr) >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf; - puts("rom_loc: "); - if (boot_status == PORBMSR_ROMLOC_NOR) - puts("nor flash"); - else if (boot_status == PORBMSR_ROMLOC_SDHC) - puts("sd"); - else - puts("unknown"); - puts("\n"); - - return 0; -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ - 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */ - return 0; -} - -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - ccsr_gur_t *gur __attribute__((unused)) = - (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - if (is_serdes_configured(SGMII_TSEC2)) { - printf("eTSEC2 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - num++; -#endif - - if (!num) { - printf("No TSECs initialized\n"); - return 0; - } - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); - -#if defined(CONFIG_UEC_ETH) - /* QE0 and QE3 need to be exposed for UCC1 - * and UCC5 Eth mode (in PMUXCR register). - * Currently QE/LBC muxed pins assumed to be - * LBC for U-Boot and PMUXCR updated by OS if required */ - - uec_standard_init(bis); -#endif - - return pci_eth_init(bis); -} - -#if defined(CONFIG_QE) -static void fdt_board_fixup_qe_pins(void *blob) -{ - int node; - - if (!hwconfig("qe")) { - /* For QE and eLBC pins multiplexing, - * When don't use QE function, remove - * qe node from dt blob. - */ - node = fdt_path_offset(blob, "/qe"); - if (node >= 0) - fdt_del_node(blob, node); - } else { - /* For TWR Peripheral Modules - TWR-SER2 - * board only can support Signal Port MII, - * so delete one UEC node when use MII port. - */ - if (hwconfig("mii")) - node = fdt_path_offset(blob, "/qe/ucc@2400"); - else - node = fdt_path_offset(blob, "/qe/ucc@2000"); - if (node >= 0) - fdt_del_node(blob, node); - } - - return; -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - - FT_FSL_PCI_SETUP; - -#ifdef CONFIG_QE - do_fixup_by_compat(blob, "fsl,qe", "status", "okay", - sizeof("okay"), 0); -#endif -#if defined(CONFIG_TWR_P1025) - fdt_board_fixup_qe_pins(blob); -#endif - fsl_fdt_fixup_dr_usb(blob, bd); - - return 0; -} -#endif diff --git a/board/freescale/p1_twr/tlb.c b/board/freescale/p1_twr/tlb.c deleted file mode 100644 index 8e403e3e44..0000000000 --- a/board/freescale/p1_twr/tlb.c +++ /dev/null @@ -1,75 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - -#ifndef CONFIG_SPL_BUILD - /* W**G* - Flash, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_64M, 1), - - /* W**G* - Flash, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_SSD_BASE, CONFIG_SYS_SSD_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_1M, 1), - -#ifdef CONFIG_PCI - /* *I*G* - PCI memory 1.5G */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI I/O effective: 192K */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256K, 1), -#endif - -#endif - -#ifdef CONFIG_SYS_RAMBOOT - /* *I*G - eSDHC boot */ - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 8, BOOKE_PAGESZ_1G, 1), -#endif - -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/TWR-P1025_defconfig b/configs/TWR-P1025_defconfig deleted file mode 100644 index e48454aa6c..0000000000 --- a/configs/TWR-P1025_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_P1_TWR=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="TWR_P1025" -CONFIG_BOOTDELAY=10 -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=ec000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=ec000000.nor:256k(vsc7385-firmware),256k(dtb),5632k(kernel),57856k(fs),256k(qe-ucode-firmware),1280k(u-boot)" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_SATA_SIL3114=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h deleted file mode 100644 index d731f9c8fa..0000000000 --- a/include/configs/p1_twr.h +++ /dev/null @@ -1,480 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -/* - * QorIQ P1 Tower boards configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <linux/stringify.h> - -#if defined(CONFIG_TWR_P1025) -#define CONFIG_BOARDNAME "TWR-P1025" -#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Conversion of LBC addr */ -#define CONFIG_SYS_LBC_LCRR 0x80000002 /* LB clock ratio reg */ -#endif - -#ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD -#define CONFIG_SYS_RAMBOOT -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SYS_SATA_MAX_DEVICE 2 -#define CONFIG_LBA48 - -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for TWR-P1025 */ - -#define CONFIG_DDR_CLK_FREQ 66666666 - -#define CONFIG_HWCONFIG -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE -#define CONFIG_BTB - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ - -#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 - -#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - -/* Default settings for DDR3 */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 - -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 - -#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655a608 -#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 -#define CONFIG_SYS_DDR_RCW_1 0x00000000 -#define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xc70c0000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL_2 0x04401050 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x03402400 - -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x00220004 -#define CONFIG_SYS_DDR_TIMING_1 0x5c5b6544 -#define CONFIG_SYS_DDR_TIMING_2 0x0fa880de -#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 -#define CONFIG_SYS_DDR_MODE_1 0x80461320 -#define CONFIG_SYS_DDR_MODE_2 0x00008000 -#define CONFIG_SYS_DDR_INTERVAL 0x09480000 - -/* - * Memory map - * - * 0x0000_0000 0x1fff_ffff DDR Up to 512MB cacheable - * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) - * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable - * - * Localbus - * 0xe000_0000 0xe002_0000 SSD1289 128K non-cacheable - * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable - * - * 0xff90_0000 0xff97_ffff L2 SRAM Up to 512K cacheable - * 0xffd0_0000 0xffd0_3fff init ram 16K Cacheable - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ -#define CONFIG_SYS_FLASH_BASE 0xec000000 - -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE - -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \ - | BR_PS_16 | BR_V) - -#define CONFIG_FLASH_OR_PRELIM 0xfc0000b1 - -#define CONFIG_SYS_SSD_BASE 0xe0000000 -#define CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SSD_BASE -#define CONFIG_SSD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_SSD_BASE_PHYS) | \ - BR_PS_16 | BR_V) -#define CONFIG_SSD_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ - OR_GPCM_ACS_DIV2 | OR_GPCM_SCY | \ - OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) - -#define CONFIG_SYS_BR2_PRELIM CONFIG_SSD_BR_PRELIM -#define CONFIG_SYS_OR2_PRELIM CONFIG_SSD_OR_PRELIM - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 -/* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -/* Size of used area in RAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ - -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ - -/* Serial Port - * open - index 2 - * shorted - index 1 - */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ -#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C spd and slave address */ -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 - -/* - * I2C2 EEPROM - */ -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C spd and slave address */ -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -#define CONFIG_SYS_I2C_PCA9555_ADDR 0x23 - -/* enable read and write access to EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 - -#if defined(CONFIG_PCI) -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 2, direct to uli, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_NAME "TWR-ELEV PCIe SLOT" -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_TSEC1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#undef CONFIG_TSEC2 -#undef CONFIG_TSEC2_NAME -#define CONFIG_TSEC3 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#undef CONFIG_HAS_ETH2 -#endif /* CONFIG_TSEC_ENET */ - -#ifdef CONFIG_QE -/* QE microcode/firmware address */ -#define CONFIG_SYS_QE_FW_ADDR 0xefec0000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#endif /* CONFIG_QE */ - -#ifdef CONFIG_TWR_P1025 -/* - * QE UEC ethernet configuration - */ -#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) - -#undef CONFIG_UEC_ETH -#define CONFIG_PHY_MODE_NEED_CHANGE - -#define CONFIG_UEC_ETH1 /* ETH1 */ -#define CONFIG_HAS_ETH0 - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 0x18 /* 0x18 for MII */ -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif /* CONFIG_UEC_ETH1 */ - -#define CONFIG_UEC_ETH5 /* ETH5 */ -#define CONFIG_HAS_ETH1 - -#ifdef CONFIG_UEC_ETH5 -#define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ -#define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ -#define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC5_PHY_ADDR 0x19 /* 0x19 for RMII */ -#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 -#endif /* CONFIG_UEC_ETH5 */ -#endif /* CONFIG_TWR-P1025 */ - -/* - * Dynamic MTD Partition support with mtdparts - */ - -/* - * Environment - */ -#ifdef CONFIG_SYS_RAMBOOT -#ifdef CONFIG_RAMBOOT_SDCARD -#define CONFIG_SYS_MMC_ENV_DEV 0 -#endif -#endif - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB - -#if defined(CONFIG_HAS_FSL_DR_USB) -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#endif -#endif - -#ifdef CONFIG_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ -"netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ -"loadaddr=1000000\0" \ -"bootfile=uImage\0" \ -"dtbfile=twr-p1025twr.dtb\0" \ -"ramdiskfile=rootfs.ext2.gz.uboot\0" \ -"qefirmwarefile=fsl_qe_ucode_1021_10_A.bin\0" \ -"tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ -"kernelflash=tftpboot $loadaddr $bootfile; " \ - "protect off 0xefa80000 +$filesize; " \ - "erase 0xefa80000 +$filesize; " \ - "cp.b $loadaddr 0xefa80000 $filesize; " \ - "protect on 0xefa80000 +$filesize; " \ - "cmp.b $loadaddr 0xefa80000 $filesize\0" \ -"dtbflash=tftpboot $loadaddr $dtbfile; " \ - "protect off 0xefe80000 +$filesize; " \ - "erase 0xefe80000 +$filesize; " \ - "cp.b $loadaddr 0xefe80000 $filesize; " \ - "protect on 0xefe80000 +$filesize; " \ - "cmp.b $loadaddr 0xefe80000 $filesize\0" \ -"ramdiskflash=tftpboot $loadaddr $ramdiskfile; " \ - "protect off 0xeeb80000 +$filesize; " \ - "erase 0xeeb80000 +$filesize; " \ - "cp.b $loadaddr 0xeeb80000 $filesize; " \ - "protect on 0xeeb80000 +$filesize; " \ - "cmp.b $loadaddr 0xeeb80000 $filesize\0" \ -"qefirmwareflash=tftpboot $loadaddr $qefirmwarefile; " \ - "protect off 0xefec0000 +$filesize; " \ - "erase 0xefec0000 +$filesize; " \ - "cp.b $loadaddr 0xefec0000 $filesize; " \ - "protect on 0xefec0000 +$filesize; " \ - "cmp.b $loadaddr 0xefec0000 $filesize\0" \ -"consoledev=ttyS0\0" \ -"ramdiskaddr=2000000\0" \ -"ramdiskfile=rootfs.ext2.gz.uboot\0" \ -"fdtaddr=1e00000\0" \ -"bdev=sda1\0" \ -"norbootaddr=ef080000\0" \ -"norfdtaddr=ef040000\0" \ -"ramdisk_size=120000\0" \ -"usbboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 " \ -"console=$consoledev,$baudrate $othbootargs ; bootm 0xefa80000 - 0xefe80000" - -#define CONFIG_NFSBOOTCOMMAND \ -"setenv bootargs root=/dev/nfs rw " \ -"nfsroot=$serverip:$rootpath " \ -"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"tftp $loadaddr $bootfile&&" \ -"tftp $fdtaddr $fdtfile&&" \ -"bootm $loadaddr - $fdtaddr" - -#define CONFIG_HDBOOT \ -"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"usb start;" \ -"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ -"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - -#define CONFIG_USB_FAT_BOOT \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"usb start;" \ -"fatload usb 0:2 $loadaddr $bootfile;" \ -"fatload usb 0:2 $fdtaddr $fdtfile;" \ -"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_USB_EXT2_BOOT \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"usb start;" \ -"ext2load usb 0:4 $loadaddr $bootfile;" \ -"ext2load usb 0:4 $fdtaddr $fdtfile;" \ -"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_NORBOOT \ -"setenv bootargs root=/dev/mtdblock3 rw " \ -"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ -"bootm $norbootaddr - $norfdtaddr" - -#define CONFIG_RAMBOOTCOMMAND_TFTP \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"tftp $ramdiskaddr $ramdiskfile;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"bootm 0xefa80000 0xeeb80000 0xefe80000" - -#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND - -#endif /* __CONFIG_H */