The EHCI definitions in i.MX31's imx-regs.h are MXC-generic, so move them to ehci-fsl.h so that all MXC SoCs can use them.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Marek Vasut marex@denx.de Cc: Stefano Babic sbabic@denx.de --- .../arch/arm/include/asm/arch-mx31/imx-regs.h | 26 -------------------- .../include/usb/ehci-fsl.h | 22 +++++++++++++++++ 2 files changed, 22 insertions(+), 26 deletions(-)
diff --git u-boot-usb-76454b2.orig/arch/arm/include/asm/arch-mx31/imx-regs.h u-boot-usb-76454b2/arch/arm/include/asm/arch-mx31/imx-regs.h index 8fd3d08..01a849d 100644 --- u-boot-usb-76454b2.orig/arch/arm/include/asm/arch-mx31/imx-regs.h +++ u-boot-usb-76454b2/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -896,32 +896,6 @@ struct esdc_regs { #define MX31_AIPS1_BASE_ADDR 0x43f00000 #define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
-/* USB portsc */ -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_TTL_ENABLED (1 << 6) - -#define MXC_EHCI_INTERNAL_PHY (1 << 7) -#define MXC_EHCI_IPPUE_DOWN (1 << 8) -#define MXC_EHCI_IPPUE_UP (1 << 9) - /* * CSPI register definitions */ diff --git u-boot-usb-76454b2.orig/include/usb/ehci-fsl.h u-boot-usb-76454b2/include/usb/ehci-fsl.h index 2869302..4dee5b0 100644 --- u-boot-usb-76454b2.orig/include/usb/ehci-fsl.h +++ u-boot-usb-76454b2/include/usb/ehci-fsl.h @@ -246,9 +246,31 @@ struct usb_ehci { /* * For MXC SOCs */ + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) #define MXC_EHCI_TTL_ENABLED (1 << 6) + #define MXC_EHCI_INTERNAL_PHY (1 << 7) +#define MXC_EHCI_IPPUE_DOWN (1 << 8) +#define MXC_EHCI_IPPUE_UP (1 << 9)
/* Board-specific initialization */ int board_ehci_hcd_init(int port);