From: Ian Ray ian.ray@ge.com
Use vidconsole for output to the LCD, now that DM_VIDEO is used. Write white text on a black background, like before migrating to DM_VIDEO.
Signed-off-by: Ian Ray ian.ray@ge.com Signed-off-by: Robert Beckett bob.beckett@collabora.com --- board/ge/bx50v3/bx50v3.c | 21 ++++++++++++++------- configs/ge_bx50v3_defconfig | 1 + include/configs/ge_bx50v3.h | 9 ++++----- 3 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 499dcb3a61..55fbcbcc81 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -217,13 +217,6 @@ static void do_enable_hdmi(struct display_info_t const *dev) imx_enable_hdmi_phy(); }
-int board_cfb_skip(void) -{ - gpio_direction_output(LVDS_POWER_GP, 1); - - return 0; -} - static int is_b850v3(void) { return confidx == 3; @@ -703,8 +696,14 @@ int ft_board_setup(void *blob, bd_t *bd)
static int do_backlight_enable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { +#if CONFIG_IS_ENABLED(DM_VIDEO) + int ret; + struct udevice *dev; + #ifdef CONFIG_VIDEO_IPUV3 if (!is_b850v3()) { + gpio_direction_output(LVDS_POWER_GP, 1); + /* We need at least 200ms between power on and backlight on * as per specifications from CHI MEI */ @@ -723,6 +722,14 @@ static int do_backlight_enable(cmd_tbl_t *cmdtp, int flag, int argc, char * cons } #endif
+ /* Probe, to find a video device to be used to show a message on + * the vidconsole. + */ + ret = uclass_get_device(UCLASS_VIDEO, 0, &dev); + if (ret) + return ret; +#endif + return 0; }
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index 7e9da38f20..0b45105134 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -65,3 +65,4 @@ CONFIG_WATCHDOG_TIMEOUT_MSECS=6000 CONFIG_IMX_WATCHDOG=y # CONFIG_EFI_LOADER is not set CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 6de5119d7f..92a927bb82 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -114,12 +114,11 @@ "swappartitions=" \ "setexpr partnum 3 - ${partnum}\0" \ "failbootcmd=" \ + "echo reached failbootcmd; " \ "bx50_backlight_enable; " \ - "msg="Monitor failed to start. Try again, or contact GE Service for support."; " \ - "echo $msg; " \ - "setenv stdout vga; " \ - "echo "\n\n\n\n " $msg; " \ - "setenv stdout serial; " \ + "setcurs 5 4; " \ + "lcdputs "Monitor failed to start. " \ + "Try again, or contact GE Service for support."; " \ "mw.b 0x7000A000 0xbc; " \ "mw.b 0x7000A001 0x00; " \ "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \