On Thu, Aug 24, 2023 at 09:59:48PM -0400, Jesse Taube wrote:
Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE.
This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE.
Suggested-by: Marek Vasut marek.vasut+renesas@gmail.com Suggested-by: Tom Rini trini@konsulko.com Signed-off-by: Jesse Taube Mr.Bossman075@gmail.com
[snip]
diff --git a/boot/Kconfig b/boot/Kconfig index 5e2d4286ae..3883cae2ba 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -738,7 +738,24 @@ config TEXT_BASE default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64 hex "Text Base" help
The address in memory that U-Boot will be running from, initially.
The address in memory that U-Boot will be copied and executed from initially.+config HAVE_SYS_UBOOT_START
- bool "Use custom U-Boot Start"
- depends on HAVE_TEXT_BASE
- help
By default, the address in memory that U-Boot will be copied from (TEXT_BASE) and theentry point are the same. Select this to start the execution of U-Boot from a different address.This may be required if a header or vector table needs to be copied but not executed.+config SYS_UBOOT_START
- hex
- depends on HAVE_TEXT_BASE
- default TEXT_BASE
- prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
- help
If TEXT_BASE differs from the start of execution, this sets the address in memory thatU-Boot will start execution from initially.
A small point, these help texts should wrap at 80 columns. If there's no other feedback I'll just fix that up when applying unless you want to.
Reviewed-by: Tom Rini trini@konsulko.com