On Sun, 2019-01-06 at 22:00 +0100, Stefan Agner wrote:
From: Stefan Agner stefan.agner@toradex.com
Access to CAAM in non-secure mode must be enabled by the boot loader first. The U-Boot CAAM driver enables access to CAAM in non-secure mode by default. Hence enable the CAAM driver to allow Linux accessing CAAM directly. This prevents error messages like the following on Linux boot: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG
While I noticed that I did not (yet) look closer into it. Good catch.
Signed-off-by: Stefan Agner stefan.agner@toradex.com
Acked-by: Marcel Ziswiler marcel.ziswiler@toradex.com
configs/colibri_imx7_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index af976bab12..c6fd7f3f4e 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -2,9 +2,11 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX7=y CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SECURE_BOOT=y CONFIG_TARGET_COLIBRI_IMX7=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y +# CONFIG_CMD_DEKBLOB is not set CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imxi mage.cfg,MX7D" @@ -35,6 +37,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y @@ -46,6 +49,7 @@ CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx7-colibri-rawnand" CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_FSL_CAAM=y CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y