Hi Hyungwon,
This patch adds support for Odroid-XU3.
Change-Id: Ia45d119a62b126f2328684485b8c372ba6acbe00
As stated previously - please run checkpatch.pl on a patch before submitting.
Signed-off-by: Hyungwon Hwang human.hwang@samsung.com
arch/arm/cpu/armv7/exynos/Kconfig | 4 + arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos5422-odroidxu3.dts | 72 ++++++++++ board/samsung/odroid-xu3/Kconfig | 12 ++ board/samsung/odroid-xu3/MAINTAINERS | 6 + board/samsung/odroid-xu3/Makefile | 7 + board/samsung/odroid-xu3/odroid-xu3.c | 132 ++++++++++++++++++ board/samsung/odroid-xu3/setup.h | 123 +++++++++++++++++ configs/odroid-xu3_defconfig | 4 + include/configs/odroid_xu3.h | 243 ++++++++++++++++++++++++++++++++++ 10 files changed, 605 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 board/samsung/odroid-xu3/Kconfig create mode 100644 board/samsung/odroid-xu3/MAINTAINERS create mode 100644 board/samsung/odroid-xu3/Makefile create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c create mode 100644 board/samsung/odroid-xu3/setup.h create mode 100644 configs/odroid-xu3_defconfig create mode 100644 include/configs/odroid_xu3.h
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 3a25fee..a47cb34 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -22,6 +22,9 @@ config TARGET_TRATS2 config TARGET_ODROID bool "Exynos4412 Odroid board"
+config TARGET_ODROID_XU3
- bool "Exynos5422 Odroid board"
config TARGET_ARNDALE bool "Exynos5250 Arndale board" select OF_CONTROL if !SPL_BUILD @@ -60,6 +63,7 @@ source "board/samsung/universal_c210/Kconfig" source "board/samsung/origen/Kconfig" source "board/samsung/trats2/Kconfig" source "board/samsung/odroid/Kconfig" +source "board/samsung/odroid-xu3/Kconfig" source "board/samsung/arndale/Kconfig" source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 2dcfcc0..66191f9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ exynos5420-peach-pit.dtb \
- exynos5800-peach-pi.dtb
- exynos5800-peach-pi.dtb \
- exynos5422-odroidxu3.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts new file mode 100644 index 0000000..34f52c6 --- /dev/null +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,72 @@ +/*
- Odroid XU3 device tree source
- Copyright (c) 2014 Samsung Electronics Co., Ltd.
http://www.samsung.com
- SPDX-License-Identifier: GPL-2.0+
- */
+/dts-v1/; +/include/ "exynos54xx.dtsi"
+/ {
- model = "Odroid XU3 based on EXYNOS5422";
- compatible = "samsung,odroidxu3", "samsung,exynos5";
- config {
hwid = "smdk5420 TEST A-A 9382";- };
- aliases {
serial0 = "/serial@12C00000";console = "/serial@12C20000";- };
- memory {
device_type = "memory";reg = <0x40000000 0x100000000x50000000 0x100000000x60000000 0x100000000x70000000 0x100000000x80000000 0x100000000x90000000 0x100000000xa0000000 0x100000000xb0000000 0xea00000>;- };
- serial@12C20000 {
status="okay";- };
- /* s2mps11 is on i2c bus 4 */
- i2c@12ca0000 {
#address-cells = <1>;#size-cells = <0>;pmic@66 {reg = <0x66>;compatible = "samsung,s2mps11-pmic";};- };
- mmc@12200000 {
samsung,bus-width = <8>;samsung,timing = <1 3 3>;samsung,removable = <0>;samsung,pre-init;- };
- mmc@12210000 {
status = "disabled";- };
- mmc@12220000 {
samsung,bus-width = <4>;samsung,timing = <1 2 3>;samsung,removable = <1>;- };
- mmc@12230000 {
status = "disabled";- };
+}; diff --git a/board/samsung/odroid-xu3/Kconfig b/board/samsung/odroid-xu3/Kconfig new file mode 100644 index 0000000..6159692 --- /dev/null +++ b/board/samsung/odroid-xu3/Kconfig @@ -0,0 +1,12 @@ +if TARGET_ODROID_XU3
+config SYS_BOARD
- default "odroid-xu3"
+config SYS_VENDOR
- default "samsung"
+config SYS_CONFIG_NAME
- default "odroid_xu3"
+endif diff --git a/board/samsung/odroid-xu3/MAINTAINERS b/board/samsung/odroid-xu3/MAINTAINERS new file mode 100644 index 0000000..50cf928 --- /dev/null +++ b/board/samsung/odroid-xu3/MAINTAINERS @@ -0,0 +1,6 @@ +ODROID-XU3 BOARD +M: Hyungwon Hwang human.hwang@samsung.com +S: Maintained +F: board/samsung/odroid-xu3/ +F: include/configs/odroid_xu3.h +F: configs/odroid-xu3_defconfig diff --git a/board/samsung/odroid-xu3/Makefile b/board/samsung/odroid-xu3/Makefile new file mode 100644 index 0000000..85ae5c5 --- /dev/null +++ b/board/samsung/odroid-xu3/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +#
+obj-y := odroid-xu3.o diff --git a/board/samsung/odroid-xu3/odroid-xu3.c b/board/samsung/odroid-xu3/odroid-xu3.c new file mode 100644 index 0000000..f054e4e --- /dev/null +++ b/board/samsung/odroid-xu3/odroid-xu3.c @@ -0,0 +1,132 @@ +/*
- Copyright (C) 2014 Samsung Electronics
- Hyungwon Hwang human.hwang@samsung.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <asm/io.h> +#include <netdev.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/power.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+#include "setup.h"
+DECLARE_GLOBAL_DATA_PTR;
+unsigned int get_board_rev(void) +{
- unsigned int rev = 0;
- return rev;
+}
+int exynos_init(void) +{
- return 0;
+}
+static int board_clock_init(void) +{
- unsigned int set, clr, clr_src_cpu, clr_pll_con0;
- struct exynos5420_clock *clk = (struct exynos5420_clock *)
samsung_get_base_clock();
- /*
* CMU_CPU clocks src to MPLL* Bit values: 0 ; 1* MUX_APLL_SEL: FIN_PLL ; FOUT_APLL* MUX_CORE_SEL: MOUT_APLL ; SCLK_MPLL* MUX_HPM_SEL: MOUT_APLL ; SCLK_MPLL_USER_C* MUX_MPLL_USER_SEL_C: FIN_PLL ; SCLK_MPLL- */
- /* Set CMU_CPU clocks src to OSCCLK */
- clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1);
- set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1);
- clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
- while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
continue;- /* Set APLL to 1200MHz */
- clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) |
PLL_ENABLE(1);- set = SDIV(0) | PDIV(2) | MDIV(100) | PLL_ENABLE(1);
- clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
- while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
continue;- /* Set CMU_CPU clocks src to APLL */
- set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0);
- clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
- while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
continue;- clr = ARM_RATIO(7) | CPUD_RATIO(7) | ATB_RATIO(7) |
PCLK_DBG_RATIO(7) | APLL_RATIO(7) | ARM2_RATIO(7);- set = ARM_RATIO(0) | CPUD_RATIO(2) | ATB_RATIO(5) |
PCLK_DBG_RATIO(5) | APLL_RATIO(0) | ARM2_RATIO(0);- clrsetbits_le32(&clk->div_cpu0, clr, set);
- while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
continue;- /* Set MPLL to 800MHz */
- set = SDIV(1) | PDIV(3) | MDIV(200) | PLL_ENABLE(1);
- clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
- while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
continue;- /* Set CLKMUX_UART src to MPLL */
- clr = UART0_SEL(7) | UART1_SEL(7) | UART2_SEL(7) |
UART3_SEL(7);
- set = UART0_SEL(3) | UART1_SEL(3) | UART2_SEL(3) |
UART3_SEL(3); +
- clrsetbits_le32(&clk->src_peric0, clr, set);
- /* Set SCLK_UART to 400 MHz (MPLL / 2) */
- clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
UART3_RATIO(15);- set = UART0_RATIO(1) | UART1_RATIO(1) | UART2_RATIO(1) |
UART3_RATIO(1);- clrsetbits_le32(&clk->div_peric0, clr, set);
- while (readl(&clk->div_stat_peric0) &
DIV_STAT_PERIC0_CHANGING)
continue;- /* Set CLKMUX_MMC src to MPLL */
- clr = MUX_MMC0_SEL(7) | MUX_MMC1_SEL(7) | MUX_MMC2_SEL(7);
- set = MUX_MMC0_SEL(3) | MUX_MMC1_SEL(3) | MUX_MMC2_SEL(3);
- clrsetbits_le32(&clk->src_fsys, clr, set);
- clr = MMC0_RATIO(0x3ff) | MMC1_RATIO(0x3ff) |
MMC2_RATIO(0x3ff);
- set = MMC0_RATIO(0) | MMC1_RATIO(0) | MMC2_RATIO(0);
- clrsetbits_le32(&clk->div_fsys1, clr, set);
- /* Wait for divider ready status */
- while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
continue;- return 0;
+}
+#ifdef CONFIG_BOARD_EARLY_INIT_F +int exynos_early_init_f(void) +{
- return board_clock_init();
+} +#endif diff --git a/board/samsung/odroid-xu3/setup.h b/board/samsung/odroid-xu3/setup.h new file mode 100644 index 0000000..481adb9 --- /dev/null +++ b/board/samsung/odroid-xu3/setup.h @@ -0,0 +1,123 @@ +/*
- (C) Copyright 2010 Samsung Electronics
- Minkyu Kang mk7.kang@samsung.com
Are those credentials correct?
- SPDX-License-Identifier: GPL-2.0+
- */
+#ifndef __ODROID_XU3_SETUP__ +#define __ODROID_XU3_SETUP__
+#define SDIV(x) ((x) & 0x7) +#define PDIV(x) ((x & 0x3f) << 8) +#define MDIV(x) ((x & 0x3ff) << 16) +#define FSEL(x) ((x & 0x1) << 27) +#define PLL_LOCKED_BIT (0x1 << 29) +#define PLL_ENABLE(x) ((x & 0x1) << 31)
Above definitions are already defined in the ./board/samsung/odroid/setup.h
It would be a very good idea to extract common setup code and put it in a separate file. Maybe in ./samsung/common directory?
+#define DIV_STAT_CHANGING 0x1
+/* CLK_SRC_CPU */ +#define MUX_APLL_SEL(x) ((x) & 0x1) +#define MUX_CORE_SEL(x) (((x) & 0x1) << 16)
+/* CLK_MUX_STAT_CPU */ +#define APLL_SEL(x) ((x) & 0x7) +#define CORE_SEL(x) (((x) & 0x7) << 16) +#define MUX_STAT_CPU_CHANGING(x) !(((x) & APLL_SEL(0)) || \
(x) & APLL_SEL(1)|| \
(x) & CORE_SEL(0)|| \
(x) & CORE_SEL(1))+/* CLK_DIV_CPU0 */ +#define ARM_RATIO(x) ((x) & 0x7) +#define CPUD_RATIO(x) (((x) & 0x7) << 4) +#define ATB_RATIO(x) (((x) & 0x7) << 16) +#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20) +#define APLL_RATIO(x) (((x) & 0x7) << 24) +#define ARM2_RATIO(x) (((x) & 0x7) << 28)
+/* CLK_DIV_STAT_CPU0 */ +#define DIV_CPUD(x) (((x) & 0x1) << 4) +#define DIV_ATB(x) (((x) & 0x1) << 16) +#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20) +#define DIV_APLL(x) (((x) & 0x1) << 24) +#define DIV_ARM2(x) (((x) & 0x1) << 28)
+#define DIV_STAT_CPU0_CHANGING (DIV_CPUD(DIV_STAT_CHANGING) | \
DIV_ATB(DIV_STAT_CHANGING) | \DIV_PCLK_DBG(DIV_STAT_CHANGING) | \DIV_APLL(DIV_STAT_CHANGING) | \DIV_ARM2(DIV_STAT_CHANGING))+/* Set CLK_SRC_PERIC0 */ +#define UART0_SEL(x) (((x) & 0xf) << 4) +#define UART1_SEL(x) (((x) & 0xf) << 8) +#define UART2_SEL(x) (((x) & 0xf) << 12) +#define UART3_SEL(x) (((x) & 0xf) << 16)
+/* Set CLK_DIV_PERIL0 */ +#define UART0_RATIO(x) (((x) & 0xf) << 8) +#define UART1_RATIO(x) (((x) & 0xf) << 12) +#define UART2_RATIO(x) (((x) & 0xf) << 16) +#define UART3_RATIO(x) (((x) & 0xf) << 20)
+/* Set CLK_DIV_STAT_PERIL0 */ +#define DIV_UART0(x) ((x) & 0x1) +#define DIV_UART1(x) (((x) & 0x1) << 4) +#define DIV_UART2(x) (((x) & 0x1) << 8) +#define DIV_UART3(x) (((x) & 0x1) << 12) +#define DIV_UART4(x) (((x) & 0x1) << 16)
+#define DIV_STAT_PERIC0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \
DIV_UART3(DIV_STAT_CHANGING) | \DIV_UART2(DIV_STAT_CHANGING) | \DIV_UART1(DIV_STAT_CHANGING) | \DIV_UART0(DIV_STAT_CHANGING))+/* CLK_SRC_FSYS */ +#define MUX_MMC0_SEL(x) (((x) & 0x7) << 8) +#define MUX_MMC1_SEL(x) (((x) & 0x7) << 12) +#define MUX_MMC2_SEL(x) (((x) & 0x7) << 16)
+/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO(x) ((x) & 0x3ff) +#define MMC1_RATIO(x) (((x) & 0x3ff) << 10) +#define MMC2_RATIO(x) (((x) & 0x3ff) << 20)
+#define DIV_MMC0(x) (((x) & 1) << 20) +#define DIV_MMC1(x) (((x) & 1) << 24) +#define DIV_MMC2(x) (((x) & 1) << 28)
+#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \
DIV_MMC1(DIV_STAT_CHANGING) | \DIV_MMC2(DIV_STAT_CHANGING))+#define MPLL_FOUT_SEL_SHIFT 4 +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/ +#define TIMEOUT_EPLL_LOCK 1000
+#define AUDIO_0_RATIO_MASK 0x0f +#define AUDIO_1_RATIO_MASK 0x0f
+#define AUDIO0_SEL_MASK 0xf +#define AUDIO1_SEL_MASK 0xf
+#define CLK_SRC_SCLK_EPLL 0x7 +#define CLK_SRC_MOUT_EPLL (1<<12) +#define AUDIO_CLKMUX_ASS (1<<0)
+/* CON0 bit-fields */ +#define EPLL_CON0_MDIV_MASK 0x1ff +#define EPLL_CON0_PDIV_MASK 0x3f +#define EPLL_CON0_SDIV_MASK 0x7 +#define EPLL_CON0_MDIV_SHIFT 16 +#define EPLL_CON0_PDIV_SHIFT 8 +#define EPLL_CON0_SDIV_SHIFT 0 +#define EPLL_CON0_LOCK_DET_EN_SHIFT 28 +#define EPLL_CON0_LOCK_DET_EN_MASK 1
+#define MPLL_FOUT_SEL_MASK 0x1 +#define BPLL_FOUT_SEL_SHIFT 0 +#define BPLL_FOUT_SEL_MASK 0x1 +#endif diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig new file mode 100644 index 0000000..74aa0cf --- /dev/null +++ b/configs/odroid-xu3_defconfig @@ -0,0 +1,4 @@ +CONFIG_ARM=y +CONFIG_ARCH_EXYNOS=y +CONFIG_TARGET_ODROID_XU3=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h new file mode 100644 index 0000000..f0d5646 --- /dev/null +++ b/include/configs/odroid_xu3.h @@ -0,0 +1,243 @@ +/*
- Copyright (C) 2013 Samsung Electronics
- Hyungwon Hwang human.hwang@samsung.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#ifndef __CONFIG_ODROID_XU3_H +#define __CONFIG_ODROID_XU3_H
+#include "exynos5-common.h"
+#define CONFIG_SYS_PROMPT "ODROID-XU3 # "
+/* High Level Configuration Options */ +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE
In the newest u-boot CONFIG_OF_{CONTROL|SEPARATE} are already defined in the _defconfig and hence not needed here.
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO
+/* Power Management is enabled */ +#define CONFIG_PM +#define CONFIG_PM_VDD_ARM 1.00 +#define CONFIG_PM_VDD_KFC 1.0250 +#define CONFIG_PM_VDD_INT 1.00 +#define CONFIG_PM_VDD_G3D 1.00 +#define CONFIG_PM_VDD_MIF 1.10
+/* Keep L2 Cache Disabled */ +#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 +#define CONFIG_SPL_TEXT_BASE 0x02027000
+/* input clock of PLL: SMDK5422 has 24MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 24000000
+#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_CMDLINE_EDITING
+/* iRAM information */ +#define CONFIG_PHY_IRAM_BASE (0x02020000) +#define CONFIG_PHY_IRAM_NS_BASE (CONFIG_PHY_IRAM_BASE + 0x53000) + +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000
+/* Offset for OM status registers */ +#define OM_STATUS_OFFSET 0x0
+/* select serial console configuration */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_SERIAL2 /* use SERIAL 2 */ +#define CONFIG_BAUDRATE 115200 +#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+#define TZPC_BASE_OFFSET 0x10000
+/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_S5P_MSHC +#define CONFIG_S5P_SDHCI +#define CONFIG_MMC_64BIT_BUS
+#if defined(CONFIG_S5P_MSHC) +#define CONFIG_MMC_EARLY_INIT +#define MMC_MAX_CHANNEL 4 +#define USE_MMC0 +#define USE_MMC2
+#define PHASE_DEVIDER 4
+#define SDR_CH0 0x03030002 +#define DDR_CH0 0x03020001
+#define SDR_CH2 0x03020001 +#define DDR_CH2 0x03030002
+#define SDR_CH4 0x0 +#define DDR_CH4 0x0 +#endif
+/*
- Boot configuration
- */
+#define BOOT_MMCSD 0x3 +#define BOOT_EMMC 0x6 +#define BOOT_EMMC_4_4 0x7
+/*
- Boot device
- */
+#define SDMMC_CH2 0x0 +#define SDMMC_CH0 0x4 +#define EMMC 0x14
+#define CONFIG_BOARD_EARLY_INIT_F
+/* PWM */ +#define CONFIG_PWM
+/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE
+/* Command definition*/ +#include <config_cmd_default.h>
+#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_BOOTZ
+#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK
+/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_STORAGE
+/* OHCI : Host 1.0 */ +#define CONFIG_USB_OHCI
+/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) + +#define CONFIG_SYS_HZ 1000
+#define CONFIG_RD_LVL
+/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ + +/*
- FIXME: The number of bank is actually 8. But there is no way to
reserver the
- last 16 Mib in the last bank now. So I just excluded the last bank
- temporally.
- */
+#define CONFIG_NR_DRAM_BANKS 7
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000
+/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_IDENT_STRING " for ODROID-XU3"
+#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0
+/* Configuration of ENV size on mmc */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+/* Configuration of ROOTFS_ATAGS */ +#define CONFIG_ROOTFS_ATAGS +#ifdef CONFIG_ROOTFS_ATAGS +#ifdef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_EXTRA_ENV_SETTINGS +#endif +#define CONFIG_EXTRA_ENV_SETTINGS "rootfslen= 100000" +#endif
+/* U-boot copy size from boot Media to DRAM.*/ +#define CONFIG_DOS_PARTITION +#define CFG_PARTITION_START 0x4000000 +#define CONFIG_IRAM_STACK 0x02074000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) + +/* Base address for secondary boot information */ +#define CONFIG_SECONDARY_BOOT_INFORM_BASE (CONFIG_SYS_TEXT_BASE - 0x8) + +/* Offset for pmu reset status */ +#define RST_STAT_OFFSET 0x404
+/* RST_STAT */ +#define WRESET (1 << 10) +#define SYS_WDTRESET (1 << 9) +#define CONFIG_SKIP_LOWLEVEL_INIT
+/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ +#undef CONFIG_EXYNOS_TMU +#undef CONFIG_TMU_CMD_DTT
+#define CONFIG_FDTDEC_MEMORY
+#undef CONFIG_ARCH_EARLY_INIT_R +#undef CONFIG_EXYNOS_SPL +#undef CONFIG_SILENT_CONSOLE +#undef CONFIG_CROS_EC +#undef CONFIG_CROS_EC_SPI +#undef CONFIG_CROS_EC_I2C +#undef CONFIG_CROS_EC_KEYB +#undef CONFIG_CMD_CROS_EC +#undef CONFIG_KEYBOARD +#undef CONFIG_SPI_BOOTING +#undef CONFIG_ENV_IS_IN_SPI_FLASH +#undef CONFIG_SPI_FLASH +#undef CONFIG_EXYNOS_SPI +#undef CONFIG_CMD_SF +#undef CONFIG_CMD_SPI +#undef CONFIG_SPI_FLASH_WINBOND +#undef CONFIG_SPI_FLASH_GIGADEVICE +#undef CONFIG_OF_SPI +#undef CONFIG_FIT_BEST_MATCH +#undef CONFIG_USB_BOOTING +#undef CONFIG_CMD_NET +#undef CONFIG_SMC911X +#undef CONFIG_CMD_PXE +#undef CONFIG_MENU +#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#endif /* __CONFIG_H */
In the config file you have enabled many features. Do we need them all for basic use case?
I assume that after build u-boot-mmc.bin size is less than 328 KiB and it will be possible to fit it into HardKernel's SD card layout.
Please consult the following link for reference: http://odroid.com/dokuwiki/doku.php?id=en:odroid-xu3
Speaking about the SD card layout. I think that it would be welcome to see ./doc entry for XU3 similar to ./doc/README.odroid