I am trying to get U-boot on a custome ppc440gx board (CPU, 64MB RAM and the 2 gigabit port).
I have a problem, I am receiving this exception below. This happen when the EE bit is set in interrupt_init.
kgdb: handle_exception; trap [0xb00]
I am not sure what is the source of this exception. (decrementer should be 0x900)
Before that I was getting exception 0x500(external interrupt) and trace it to the UIC registers(polarity, trigger,...) being cleared (where?). So I restore their value in interrrupt_init_cpu.
Note that I have run vxWorks and Linux on this board. I could believe I broke something.
-----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of philipv@cam.org Sent: Thursday, September 02, 2004 3:29 PM To: u-boot-users@lists.sourceforge.net Subject: [U-Boot-Users] Booting in IPv6
Is there any support planned or in progress for booting in an IPv6 network?
Philip
------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users