28 Dec
2004
28 Dec
'04
10:37 p.m.
In message <r02010400-1037-E8430311591111D9819900039387ACB6@[10.0.1.1]> you wrote:
Someone has an uImage created for a mpc866/mpc852 with console on SMC1 with CFG_IMMR set at 0xff000000?
I have quite a lot of them, but theuy won't be of any use for you as they are configured for boards which you probably are NOT using.
Wanna run a quick test if either my ELDK config is wrong or something during launch of the Kernel within u-boot...
You need a kernel configured for your own board.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Documentation is like sex: when it is good, it is very, very good;
and when it is bad, it is better than nothing. - Dick Brandon