When power cycle the Jaguar2 boards, it couldn't read the phys, therefore it always deduce that the board type is pcb111.
Add a small delay after setting the gpio pins, fix the issue.
Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com --- board/mscc/jr2/jr2.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/board/mscc/jr2/jr2.c b/board/mscc/jr2/jr2.c index 226181f..58a4a04 100644 --- a/board/mscc/jr2/jr2.c +++ b/board/mscc/jr2/jr2.c @@ -80,6 +80,9 @@ static void do_board_detect(void) for (i = 56; i < 60; i++) vcoreiii_gpio_set_alternate(i, 1);
+ /* small delay for settling the pins */ + mdelay(30); + if (mscc_phy_rd(0, 0x10, 0x3, &pval) == 0 && ((pval >> 4) & 0x3F) == 0x3c) { gd->board_type = BOARD_TYPE_PCB112; /* Serval2-NID */