Add support for generic NAND SPL via the SPL framework into the mxc_nand_spl driver. This is basically just a simple rename and publication of the already implemented functions. To avoid the bare-bones functions getting in the way of the NAND_SPL, build them only if CONFIG_SPL_FRAMEWORK is not defined.
Also make sure the requested payload is aligned to full pages, otherwise this simple driver fails to load the last page.
Signed-off-by: Marek Vasut marex@denx.de Cc: Albert ARIBAUD albert.u.boot@aribaud.net Cc: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Scott Wood scottwood@freescale.com Cc: Stefano Babic sbabic@denx.de Cc: Tom Rini trini@ti.com --- drivers/mtd/nand/mxc_nand_spl.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
V2: Check CONFIG_SPL_FRAMEWORK instead to test if we're building with NAND_SPL or really bare-bones SPL.
diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c index 09f23c3..5608352 100644 --- a/drivers/mtd/nand/mxc_nand_spl.c +++ b/drivers/mtd/nand/mxc_nand_spl.c @@ -290,7 +290,7 @@ static int is_badblock(int pagenumber) return 0; }
-static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) +int nand_spl_load_image(uint32_t from, unsigned int size, void *buf) { int i; unsigned int page; @@ -303,6 +303,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) page = from / CONFIG_SYS_NAND_PAGE_SIZE; i = 0;
+ size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE); while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) { if (nfc_read_page(page, buf) < 0) return -1; @@ -332,6 +333,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) return 0; }
+#ifndef CONFIG_SPL_FRAMEWORK /* * The main entry for NAND booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image @@ -345,8 +347,9 @@ void nand_boot(void) * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must * be aligned to full pages */ - if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { + if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { /* Copy from NAND successful, start U-boot */ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; uboot(); @@ -364,3 +367,7 @@ void hang(void) /* Loop forever */ while (1) ; } +#endif + +void nand_init(void) {} +void nand_deselect(void) {}