27 Jul
2016
27 Jul
'16
9:54 a.m.
On 19 July 2016 at 14:40, Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com wrote:
Dont set quad enable for micron devices in all cases Setting the quad enable bit in micron expects all other commands like register reads on quad lines which may not be supported by some controllers. Hence, dont set the quad enable if controller driver sets the no_all_quad.
Sorry, I'm not fond of controller hacks, please try for any other solution and even planning to remove existing ones.
thanks!
--
Jagan.