Add gpio.h header file that includes JH7110 helper macros. The file is imported from StarFive github[1] with small changes such as alignment.
[1]: https://github.com/starfive-tech/u-boot
Signed-off-by: Chanho Park chanho61.park@samsung.com --- arch/riscv/include/asm/arch-jh7110/gpio.h | 85 +++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 arch/riscv/include/asm/arch-jh7110/gpio.h
diff --git a/arch/riscv/include/asm/arch-jh7110/gpio.h b/arch/riscv/include/asm/arch-jh7110/gpio.h new file mode 100644 index 000000000000..90aa2f8a9ed4 --- /dev/null +++ b/arch/riscv/include/asm/arch-jh7110/gpio.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: yanhong yanhong.wang@starfivetech.com + * + */ + +#ifndef _GPIO_STARFIVE_H_ +#define _GPIO_STARFIVE_H_ + +#include <asm/arch/regs.h> + +#define GPIO_NUM_SHIFT 2 /*one dword include 4 gpios*/ +#define GPIO_BYTE_SHIFT 3 + +#define GPIO_INDEX_MASK 0x3 + +#define GPIO_DOEN_MASK 0x3f +#define GPIO_DOUT_MASK 0x7f +#define GPIO_DIN_MASK 0x7f +#define GPIO_DS_MASK 0x06 +#define GPIO_DS_SHIFT 1 +#define GPIO_SLEW_MASK BIT(5) +#define GPIO_SLEW_SHIFT 5 +#define GPIO_PULL_MASK 0x18 +#define GPIO_PULL_SHIFT 3 +#define GPIO_PULL_UP 1 +#define GPIO_PULL_DOWN 2 + +#define NR_GPIOS 64 + +#define GPIO_OFFSET(gpio) \ + (((gpio) >> GPIO_NUM_SHIFT) << GPIO_NUM_SHIFT) + +#define GPIO_SHIFT(gpio) \ + (((gpio) & GPIO_INDEX_MASK) << GPIO_BYTE_SHIFT) + +enum gpio_state { + LOW, + HIGH +}; + +#define GPIO_DOEN 0x0 +#define GPIO_DOUT 0x40 +#define GPIO_DIN 0x80 +#define GPIO_EN 0xdc +#define GPIO_LOW_IE 0x100 +#define GPIO_HIGH_IE 0x104 +#define GPIO_CONFIG 0x120 + +#define SYS_IOMUX_DOEN(gpio, oen) \ + clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_OFFSET(gpio), \ + GPIO_DOEN_MASK << GPIO_SHIFT(gpio), \ + (oen) << GPIO_SHIFT(gpio)) + +#define SYS_IOMUX_DOUT(gpio, gpo) \ + clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_DOUT + GPIO_OFFSET(gpio), \ + GPIO_DOUT_MASK << GPIO_SHIFT(gpio), \ + ((gpo) & GPIO_DOUT_MASK) << GPIO_SHIFT(gpio)) + +#define SYS_IOMUX_DIN(gpio, gpi)\ + clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_DIN + GPIO_OFFSET(gpi), \ + GPIO_DIN_MASK << GPIO_SHIFT(gpi), \ + ((gpio + 2) & GPIO_DIN_MASK) << GPIO_SHIFT(gpi)) + +#define SYS_IOMUX_SET_DS(gpio, ds) \ + clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_CONFIG + gpio * 4, \ + GPIO_DS_MASK, (ds) << GPIO_DS_SHIFT) + +#define SYS_IOMUX_SET_SLEW(gpio, slew) \ + clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_CONFIG + gpio * 4, \ + GPIO_SLEW_MASK, (slew) << GPIO_SLEW_SHIFT) + +#define SYS_IOMUX_SET_PULL(gpio, pull) \ + clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_CONFIG + gpio * 4, \ + GPIO_PULL_MASK, (pull) << GPIO_PULL_SHIFT) + +#define SYS_IOMUX_COMPLEX(gpio, gpi, gpo, oen) \ + do { \ + SYS_IOMUX_DOEN(gpio, oen); \ + SYS_IOMUX_DOUT(gpio, gpo); \ + SYS_IOMUX_DIN(gpio, gpi); \ + } while (0) + +#endif /* _GPIO_STARFIVE_H_ */