Generate a FIT update image during build. The image will be called "u-boot.update" and can be used to build an EFI UpdateCapsule or during DFU mode. Although, the latter isn't supported because there is no USB OTG driver yet.
Signed-off-by: Michael Walle michael@walle.cc --- changes since v1: - new patch
.../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 35 +++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi index 8538ce7984..d4b833284e 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -12,6 +12,12 @@ };
binman: binman { + multiple-images; + }; +}; + +&binman { + u_boot_rom: u-boot-rom { filename = "u-boot.rom"; pad-byte = <0xff>;
@@ -130,6 +136,31 @@ }; };
+&binman { + u-boot-update { + filename = "u-boot.update"; + + fit { + description = "FIT update image"; + + images { + u-boot-bin { + description = "U-Boot"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <0>; /* unused */ + + blob { + filename = "u-boot.rom"; + }; + }; + }; + }; + }; +}; + #ifdef CONFIG_SL28_ENABLE_SER0_CONSOLE / { chosen { @@ -139,7 +170,7 @@ #endif
#ifdef CONFIG_SL28_SPL_LOADS_ATF_BL31 -&binman { +&u_boot_rom { fit { images { bl31 { @@ -188,7 +219,7 @@ #endif
#ifdef CONFIG_SL28_SPL_LOADS_OPTEE_BL32 -&binman { +&u_boot_rom { fit { images { bl32 {