Hi,
On Sat, 10 Sept 2022 at 16:38, noman pouigt variksla@gmail.com wrote:
I am creating a boot.img using below command: mkimage -D "-I dts -O dtb -p 1024" -f boot.its boot.img https://ideone.com/OyHuGz -- .its file
Using this boot.img I am able to see this in the device: ## Loading kernel from FIT Image at 12000000 ... ## Flattened Device Tree blob at 70065000
but no logs for ramdisk loading. Later during kernel boot getting below: Initramfs unpacking failed: invalid magic at start of compressed archive
However, when I have below .its file and directly flashing the fitImage then it is able to mount initramfs. https://ideone.com/RFFLGj -- its file
So I am assuming that ramdisk inside the boot.img is not proper, to confirm I extracted using below command: dumpimage -T flat_dt -l boot.img -p 1 -o ramdisk"
This extracted ramdisk and the supplied ramdisk to mkimage are not matching at all.
Any pointers to fix this problem will really help.
You might check that U-Boot is entering select_ramdisk() correctly when the 'bootm' command runs, and see what happens there. It should call fit_image_load() to load the ramdisk. I don't see any logging for that case though - you can add it if you like.
I cannot see anything wrong with the .its file.
Regards, Simon
[1] mkimage version 2021.07-g1a6716ec1c