7 Feb
2013
7 Feb
'13
7:08 a.m.
Thanks Scott
SD Card boot only to write firmware to NAND flash.
*'And you should never use "nand scrub" in an automated way.' * what is better way of doing this, since I am using with an old uboot..
-Ratheendran
On Thu, Feb 7, 2013 at 12:05 AM, Scott Wood scottwood@freescale.com wrote:
On 02/05/2013 10:25:41 PM, Ratheendran R wrote:
Thanks Scott for your valuable feedback & suggestion.
I am using the board which is uses SD Card boot & NAND boot options,SD CARD boot is used to write firmware to be NAND flash and used only to update the firmware to NAND.
Every time you boot?
And you should never use "nand scrub" in an automated way.
-Scott