Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 8 ++++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 +++ include/configs/mx23_olinuxino.h | 41 ++++++++++++++++++++++++++-- 3 files changed, 50 insertions(+), 3 deletions(-)
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 2501417..6077d70 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -53,6 +53,14 @@ int dram_init(void) return mxs_dram_init(); }
+#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + /* Power-on Ethernet */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); +} +#endif + #ifdef CONFIG_CMD_MMC static int mx23_olx_mmc_cd(int id) { diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 3bbf5ad..8f7ba0b 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -95,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, + + /* Ethernet */ + MX23_PAD_GPMI_ALE__GPIO_0_17 | + (MXS_PAD_12MA | MXS_PAD_3V3), };
void board_init_ll(void) diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index e081c49..9adbb9c 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -55,11 +55,13 @@ #define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO #define CONFIG_CMD_LED #define CONFIG_CMD_MMC +#define CONFIG_CMD_NET #define CONFIG_CMD_USB
/* @@ -150,6 +152,12 @@ #define CONFIG_USB_STORAGE #endif
+/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#endif + /* * Boot Linux */ @@ -175,6 +183,7 @@ /* * Extra Environments */ + #define CONFIG_EXTRA_ENV_SETTINGS \ "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ @@ -191,6 +200,8 @@ "fdt_file=imx23-olinuxino.dtb\0" \ "fdt_addr=0x41000000\0" \ "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "usbethaddr=00:11:22:33:44:55\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ @@ -216,6 +227,31 @@ "fi; " \ "else " \ "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "usb start; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;" \ + "fi; " \ + "else " \ + "bootm; " \ "fi;\0"
#define CONFIG_BOOTCOMMAND \ @@ -225,10 +261,9 @@ "else " \ "if run loaduimage; then " \ "run mmcboot; " \ - "else " \ - "echo ERR: Fail to boot from MMC; " \ + "else run netboot; " \ "fi; " \ "fi; " \ - "else exit; fi" + "else run netboot; fi"
#endif /* __MX23_OLINUXINO_CONFIG_H__ */