Cleanup for M5271EVB: Added clarification on the use of CONFIG_SYS_CLOCK. Modified to use u-boot's HUSH parser. Cleanup on environment settings.
Dependencies: Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier. This depends on a patch to include/asm-m68k/m5271.h that defines the multiplier and divider ratios.
Removed the definition of CONFIG_SYS_FECI2C. This depends on a patch that removes the use of it in cpu/mcf52x2/cpu_init.c
Signed-off-by: Richard Retanubun RichardRetanubun@RuggedCom.com --- This patch depends on: Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier. This depends on a patch to include/asm-m68k/m5271.h that defines the multiplier and divider ratios.
Removed the definition of CONFIG_SYS_FECI2C. This depends on a patch that removes the use of it in cpu/mcf52x2/cpu_init.c
include/configs/M5271EVB.h | 35 +++++++++++++++++++++++------------ 1 files changed, 23 insertions(+), 12 deletions(-)
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 7ddeb55..b8eb156 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -82,11 +82,14 @@ #define CONFIG_CMD_MISC
#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADB +#define CONFIG_CMDLINE_EDITING 1 /* enables command line history */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 +# define CONFIG_NET_MULTI 0 # define CONFIG_MII 1 # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY @@ -116,7 +119,7 @@ #define CONFIG_SYS_I2C_OFFSET 0x00000300 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ #define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC # define CONFIG_NET_RETRY_COUNT 5 @@ -128,16 +131,16 @@ # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */
-#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_HOSTNAME M5271EVB #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp $loadaddr $uboot\0" \ "upd=run load; run prog\0" \ - "prog=prot off ffe00000 ffe2ffff;" \ - "era ffe00000 ffe2ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b $loadaddr ffe00000 $filesize;" \ "save\0" \ ""
@@ -159,7 +162,18 @@ #define CONFIG_SYS_MEMTEST_END 0x380000
#define CONFIG_SYS_HZ 1000000 + +/* Clock configuration + * The external oscillator is a 25.000 MHz + * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk) + * bus_clk = (cpu_clk/2) (fixed ratio) + * + * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to + * match the new clock speed. Max cpu_clk is 150 MHz. + */ #define CONFIG_SYS_CLK 100000000 +#define CONFIG_SYS_MCF_SYNCR (CONFIG_SYS_MCF_SYNCR_MFD_4X | \ + CONFIG_SYS_MCF_SYNCR_RFD_DIV1)
/* * Low Level Configuration Settings @@ -216,7 +230,4 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16
-/* Port configuration */ -#define CONFIG_SYS_FECI2C 0xF0 - #endif /* _M5271EVB_H */