Hi Patrick
On 6/18/21 8:32 AM, Patrice CHOTARD wrote:
Hi Patrick
On 6/4/21 6:30 PM, Patrick Delaunay wrote:
Use the correct name for STMicroelectronics phys config properties, replace '_' by '-': "st,eth_clk_sel" => "st,eth-clk-sel" "st,eth-ref-clk-sel" => st,eth-clk-sel"
These property name are aligned with the upstreamed Linux kernel binding: linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
See Linux kernel commit "dt-bindings: net: stmmac: add phys config properties" merged in v5.1-rc1.
This patch allow to reuse the kernel device tree directly in U-Boot.
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com
board/dhelectronics/dh_stm32mp1/board.c | 4 ++-- board/st/stm32mp1/stm32mp1.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index ac1af718d4..d7c1857c16 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -660,11 +660,11 @@ int board_interface_eth_init(struct udevice *dev, bool eth_ref_clk_sel_reg = false;
/* Gigabit Ethernet 125MHz clock selection. */
- eth_clk_sel_reg = dev_read_bool(dev, "st,eth_clk_sel");
eth_clk_sel_reg = dev_read_bool(dev, "st,eth-clk-sel");
/* Ethernet 50Mhz RMII clock selection */ eth_ref_clk_sel_reg =
dev_read_bool(dev, "st,eth_ref_clk_sel");
dev_read_bool(dev, "st,eth-ref-clk-sel");syscfg = (u8 *)syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 261ec15e1b..18b8870269 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -733,11 +733,11 @@ int board_interface_eth_init(struct udevice *dev, bool eth_ref_clk_sel_reg = false;
/* Gigabit Ethernet 125MHz clock selection. */
- eth_clk_sel_reg = dev_read_bool(dev, "st,eth_clk_sel");
eth_clk_sel_reg = dev_read_bool(dev, "st,eth-clk-sel");
/* Ethernet 50Mhz RMII clock selection */ eth_ref_clk_sel_reg =
dev_read_bool(dev, "st,eth_ref_clk_sel");
dev_read_bool(dev, "st,eth-ref-clk-sel");syscfg = (u8 *)syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied on u-boot-stm32/next
Thanks