Hi Jagan, On Sat, Sep 17, 2016 at 02:18:35AM +0530, Jagan Teki wrote:
Added kconfig for IMX_THERMAL driver.
Cc: Simon Glass sjg@chromium.org Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Peng Fan peng.fan@nxp.com Cc: Matteo Lisi matteo.lisi@engicam.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
drivers/thermal/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 8e22ea7..f0ffbb3 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -5,3 +5,16 @@ config DM_THERMAL temperature sensors to permit warnings, speed throttling or even automatic power-off when the temperature gets too high or low. Other devices may be discrete but connected on a suitable bus.
+if DM_THERMAL
+config IMX_THERMAL
- bool "Temperature sensor driver for Freescale i.MX SoCs"
- depends on MX6
MX6 and MX7. Also I think this line could be dropped, add "selects IMX_THERMAL" in board Kconfig entry.
Regards, Peng.
- help
Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.It supports one critical trip point and one passive trip point. Thecpufreq is used as the cooling device to throttle CPUs when thepassive trip is crossed.+endif # if DM_THERMAL
2.7.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot