Add the tlb entries based on the configuration of the SRIO interfaces. Every SRIO interface has 256M space:
#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
Signed-off-by: Liu Gang Gang.Liu@freescale.com --- board/freescale/b4860qds/tlb.c | 19 +++++++++++++++++-- 1 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c index 373cb78..6d634bf 100644 --- a/board/freescale/b4860qds/tlb.c +++ b/board/freescale/b4860qds/tlb.c @@ -111,8 +111,6 @@ struct fsl_e_tlb_entry tlb_table[] = { #ifdef CONFIG_SYS_NAND_BASE /* * *I*G - NAND - * entry 14 and 15 has been used hard coded, they will be disabled - * in cpu_init_f, so we use entry 16 for nand. */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -122,6 +120,23 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 12, BOOKE_PAGESZ_4K, 1),
+ /* + * *I*G - SRIO + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for SRIO2. + */ +#ifdef CONFIG_SYS_SRIO1_MEM_PHYS + /* *I*G* - SRIO1 */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO1_MEM_VIRT, CONFIG_SYS_SRIO1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_256M, 1), +#endif +#ifdef CONFIG_SYS_SRIO2_MEM_PHYS + /* *I*G* - SRIO2 */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO2_MEM_VIRT, CONFIG_SYS_SRIO2_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_256M, 1), +#endif };
int num_tlb_entries = ARRAY_SIZE(tlb_table);