Hi Enric,
On Wed, Feb 6, 2013 at 9:29 AM, Enric Balletbo i Serra eballetbo@gmail.com wrote:
From: Enric Balletbo i Serra eballetbo@iseebcn.com
The IGEP COM PROTON is a new ultra compact module design with an on-board ethernet controller.
Signed-off-by: Enric Balletbo i Serra eballetbo@iseebcn.com
MAINTAINERS | 1 + board/isee/igep00x0/igep00x0.c | 3 +++ board/isee/igep00x0/igep00x0.h | 3 +++ boards.cfg | 1 + 4 files changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS index d3ed390..1aed6d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -607,6 +607,7 @@ Enric Balletbo i Serra eballetbo@iseebcn.com
igep0020 ARM ARMV7 (OMAP3xx SoC) igep0030 ARM ARMV7 (OMAP3xx SoC)
igep0032 ARM ARMV7 (OMAP3xx SoC)Eric Benard eric@eukrea.com
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 49fcf34..93aea8b 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -68,8 +68,11 @@ void show_boot_progress(int val) return; }
+/* Skip in the case of IGEP0032 machine */ +#if !(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) if (!gpio_request(IGEP00X0_GPIO_LED, "")) gpio_direction_output(IGEP00X0_GPIO_LED, 1); +#endif } #endif
So, this board doesn't have a GPIO LED to show it boot status?
If that's the case I think there is no point to call show_boot_progress(). Since this function is only compiled when CONFIG_SHOW_BOOT_PROGRESS is defined. I think that a better approach is to just define it for the machines that have a boot progress GPIO LED. e.g:
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 88eadb4..98eed0f 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -85,8 +85,11 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) /* define to enable boot progress via leds */ #define CONFIG_SHOW_BOOT_PROGRESS +#endif
/* USB */ #define CONFIG_MUSB_UDC 1
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index dbc7cf6..f5fce9c 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -39,6 +39,9 @@ const omap3_sysinfo sysinfo = { #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) "IGEP COM MODULE/ELECTRON", #endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
"IGEP COM PROTON",+#endif #if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", #else diff --git a/boards.cfg b/boards.cfg index 691a32a..8453836 100644 --- a/boards.cfg +++ b/boards.cfg @@ -259,6 +259,7 @@ igep0020 arm armv7 igep00x0 isee igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 --
This doesn't have a NAND version too like IGEP0020 and IGEP0030 boards?
You said that this board has an on-board ethernet controller. Does this board use the SMC911X chip connected to the OMAP GPMC too? In that case I guess you need something like this to have CONFIG_CMD_NET enabled on board/isee/igep00x0/igep00x0.c for this board too:
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 0e7f924..88eadb4 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -118,7 +118,8 @@ #ifdef CONFIG_BOOT_NAND #define CONFIG_CMD_NAND #endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #endif #define CONFIG_CMD_DHCP
Thanks a lot and best regards, Javier