A few sections are a little out of date now. Update them.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
tools/binman/binman.rst | 83 ++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 39 deletions(-)
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index 9348a3e8e1d..680a1c38a8d 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -9,39 +9,43 @@ For example, we may have SPL, U-Boot, a device tree and an environment area grouped together and placed in MMC flash. When the system starts, it must be able to find these pieces.
-So far U-Boot has not provided a way to handle creating such images in a -general way. Each SoC does what it needs to build an image, often packing or -concatenating images in the U-Boot build system. - -Binman aims to provide a mechanism for building images, from simple -SPL + U-Boot combinations, to more complex arrangements with many parts. +Building firmware should be separate from packaging it. Many of the complexities +of modern firmware build systems come from trying to do both at once. With +binman, you build all the pieces that are needed, using whatever assortment of +projects and build systems are needed, then use binman to stitch everything +together.
What it does ------------
Binman reads your board's device tree and finds a node which describes the -required image layout. It uses this to work out what to place where. The -output file normally contains the device tree, so it is in principle possible -to read an image and extract its constituent parts. +required image layout. It uses this to work out what to place where. + +Binman provides a mechanism for building images, from simple SPL + U-Boot +combinations, to more complex arrangements with many parts. It also allows +users to inspect images, extract and replace binaries within them, repacking if +needed.
Features --------
-So far binman is pretty simple. It supports binary blobs, such as 'u-boot', -'spl' and 'fdt'. It supports empty entries (such as setting to 0xff). It can -place entries at a fixed location in the image, or fit them together with -suitable padding and alignment. It provides a way to process binaries before -they are included, by adding a Python plug-in. The device tree is available -to U-Boot at run-time so that the images can be interpreted. +Apart from basic padding, alignment and positioning features, Binman supports +hierarchical images, compression, hashing and dealing with the binary blobs +which are a sad trend in open-source firmware at present.
-Binman can update the device tree with the final location of everything when it -is done. Entry positions can be provided to U-Boot SPL as run-time symbols, -avoiding device-tree code overhead. +Executable binaries can access the location of other binaries in an image by +using special linker symbols (zero-overhead but somewhat limited) or by reading +the devicetree description of the image.
-Binman can also support incorporating filesystems in the image if required. -For example x86 platforms may use CBFS in some cases. +Binman is designed primarily for use with U-Boot and associated binaries such +as ARM Trusted Firmware, but it is suitable for use with other projects, such +as Zephyr. Binman also provides facilities useful in Chromium OS, such as CBFS, +vblocks and and the like. + +Binman provides a way to process binaries before they are included, by adding a +Python plug-in.
Binman is intended for use with U-Boot but is designed to be general enough to be useful in other image-packaging situations. @@ -50,11 +54,11 @@ to be useful in other image-packaging situations. Motivation ----------
-Packaging of firmware is quite a different task from building the various -parts. In many cases the various binaries which go into the image come from -separate build systems. For example, ARM Trusted Firmware is used on ARMv8 -devices but is not built in the U-Boot tree. If a Linux kernel is included -in the firmware image, it is built elsewhere. +As mentioned above, packaging of firmware is quite a different task from +building the various parts. In many cases the various binaries which go into +the image come from separate build systems. For example, ARM Trusted Firmware +is used on ARMv8 devices but is not built in the U-Boot tree. If a Linux kernel +is included in the firmware image, it is built elsewhere.
It is of course possible to add more and more build rules to the U-Boot build system to cover these cases. It can shell out to other Makefiles and @@ -215,17 +219,12 @@ Binman has a few other options which you can see by running 'binman -h'. Enabling binman for a board ---------------------------
-At present binman is invoked from a rule in the main Makefile. Typically you -will have a rule like:: - - ifneq ($(CONFIG_ARCH_<something>),) - u-boot-<your_suffix>.bin: <input_file_1> <input_file_2> checkbinman FORCE - $(call if_changed,binman) - endif +At present binman is invoked from a rule in the main Makefile. You should be +able to enable CONFIG_BINMAN to enable this rule.
-This assumes that u-boot-<your_suffix>.bin is a target, and is the final file -that you need to produce. You can make it a target by adding it to INPUTS-y -either in the main Makefile or in a config.mk file in your arch subdirectory. +The output file is typically named image.bin and is located in the output +directory. If input files are needed to you add these to INPUTS-y either in the +main Makefile or in a config.mk file in your arch subdirectory.
Once binman is executed it will pick up its instructions from a device-tree file, typically <soc>-u-boot.dtsi, where <soc> is your CONFIG_SYS_SOC value. @@ -786,12 +785,17 @@ the 'warning' line in scripts/Makefile.lib to see what it has found::
Entry Documentation -------------------- +===================
For details on the various entry types supported by binman and how to use them, -see README.entries. This is generated from the source code using: +see entries.rst which is generated from the source code using: + + binman entry-docs >tools/binman/entries.rst + +.. toctree:: + :maxdepth: 2
- binman entry-docs >tools/binman/README.entries + entries.rst
Managing images @@ -1136,7 +1140,8 @@ To do Some ideas:
- Use of-platdata to make the information available to code that is unable - to use device tree (such as a very small SPL image) + to use device tree (such as a very small SPL image). For now, limited info is + available via linker symbols - Allow easy building of images by specifying just the board name - Support building an image for a board (-b) more completely, with a configurable build directory