In message OFEBEA6ADB.E3509735-ON6525707E.00234D5F-6525707E.00256DDB@tcs.com you wrote:
I am trying to boot the OMAP5912 board from u-boot prompt, with a multi file image. I copied the image to RAM at address 10000000, and and execute " bootm 10000000". The system hangs. Even the hard reset does not give the u-boot.
I guess this has nothing to do with it being a multi file image...
I used the following command to create the multi file image "mkimage -A arm -O Linux -T multi -C gzip -n 'Ramdisk Image' -d omap/vmlinux.gz:ramdisk.img.gz linux.img" and set "bootargs=rw" before
You gogeot to set the load and entry point addresses!
Image Type: ARM Linux Multi-File Image (gzip compressed)
...
Load Address: 00000000 Entry Point: 00000000
This is bound to fail on ARM.
Notice: The information contained in this e-mail message ...
Please make sure not to include this nonsense trailer when poosting to public mailing lists.
--=_alternative 00256D986525707E_= Content-Type: text/html; charset="US-ASCII"
And never again post HTML on this list!!
Best regards,
Wolfgang Denk