From: Peng Fan peng.fan@nxp.com
Enable CONFIG_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work.
Signed-off-by: Peng Fan peng.fan@nxp.com Tested-by: Teresa Remmet t.remmet@phytec.de Reviewed-by: Fabio Estevam festevam@denx.de --- board/phytec/phycore_imx8mm/spl.c | 12 ++---------- board/phytec/phycore_imx8mp/spl.c | 8 -------- configs/phycore-imx8mm_defconfig | 1 + configs/phycore-imx8mp_defconfig | 1 + include/configs/phycore_imx8mm.h | 3 --- include/configs/phycore_imx8mp.h | 3 --- 6 files changed, 4 insertions(+), 24 deletions(-)
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c index d54145ef995..7f24a3affc8 100644 --- a/board/phytec/phycore_imx8mm/spl.c +++ b/board/phytec/phycore_imx8mm/spl.c @@ -57,14 +57,8 @@ int board_fit_config_name_match(const char *name) return 0; }
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE)
-static iomux_v3_cfg_t const uart_pads[] = { - IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static iomux_v3_cfg_t const wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -77,8 +71,6 @@ int board_early_init_f(void)
set_wdog_reset(wdog);
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); - return 0; }
@@ -92,8 +84,6 @@ void board_init_f(ulong dummy)
board_early_init_f();
- preloader_console_init(); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);
@@ -103,6 +93,8 @@ void board_init_f(ulong dummy) hang(); }
+ preloader_console_init(); + enable_tzc380();
/* DDR initialization */ diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c index 19c486e5517..38a581bef57 100644 --- a/board/phytec/phycore_imx8mp/spl.c +++ b/board/phytec/phycore_imx8mp/spl.c @@ -89,14 +89,8 @@ int board_fit_config_name_match(const char *name) return 0; }
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-static iomux_v3_cfg_t const uart_pads[] = { - MX8MP_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX8MP_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static iomux_v3_cfg_t const wdog_pads[] = { MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -109,8 +103,6 @@ int board_early_init_f(void)
set_wdog_reset(wdog);
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); - return 0; }
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index b8cda9f64f2..0316d45caeb 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -120,6 +120,7 @@ CONFIG_PINCTRL_IMX8M=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index d10ab2a22c1..2c53a5ff8c6 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -111,6 +111,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPL_POWER_I2C=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 1d01104cfe8..a14a076172c 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -72,7 +72,4 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
-/* UART */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3) - #endif /* __PHYCORE_IMX8MM_H */ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 75ddcf465f9..9c7331a4167 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -72,7 +72,4 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000
-/* UART */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) - #endif /* __PHYCORE_IMX8MP_H */