Add static struct eth_ops and set ops function pointers statically. Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek tmshlvck@gmail.com --- drivers/net/xilinx_axi_emac.c | 15 ++++++++++----- 1 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 54a871b..44ece48 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -622,6 +622,15 @@ static int axiemac_bus_reset(struct mii_dev *bus) return 0; }
+static struct eth_ops axiemac_ops = { + .init = axiemac_init, + .halt = axiemac_halt, + .send = axiemac_send, + .recv = axiemac_recv, + .write_hwaddr = axiemac_setup_mac +}; + + int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, unsigned long dma_addr) { @@ -645,11 +654,7 @@ int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, priv->dmatx = (struct axidma_reg *)dma_addr; /* RX channel offset is 0x30 */ priv->dmarx = (struct axidma_reg *)(dma_addr + 0x30); - dev->eo->init = axiemac_init; - dev->eo->halt = axiemac_halt; - dev->eo->send = axiemac_send; - dev->eo->recv = axiemac_recv; - dev->eo->write_hwaddr = axiemac_setup_mac; + dev->eo = &axiemac_ops;
#ifdef CONFIG_PHY_ADDR priv->phyaddr = CONFIG_PHY_ADDR;