This patch series provides code to perform read leveling - RDLVL, which is adjusting the DQS strobe in relation to the DQ signals so that the strobe edge is centered in the window of valid read data.
The code is based on Vybrid's Reference Manual's: "VFxxx Controller Reference Manual, Rev. 0, 10/2016", page 1600, 10.1.6.16.4.1 "Software Read Leveling in MC Evaluation Mode"
and uses clarification provided by following NXP's community thread: "Vybrid: About DDR leveling feature on DDRMC." https://community.nxp.com/thread/395323
It depends on a BITMAP rework patch: usb: composite: Move bitmap related operations to ./include/linux/bitmap.h http://patchwork.ozlabs.org/patch/1006448/
Lukasz Majewski (3): ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) ddr: vybrid: Provide code to perform on-boot calibration ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
arch/arm/include/asm/arch-vf610/imx-regs.h | 6 + arch/arm/mach-imx/Kconfig | 8 + arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/ddrmc-vf610-calibration.c | 336 ++++++++++++++++++++++++++++ arch/arm/mach-imx/ddrmc-vf610-calibration.h | 59 +++++ arch/arm/mach-imx/ddrmc-vf610.c | 7 + 6 files changed, 417 insertions(+) create mode 100644 arch/arm/mach-imx/ddrmc-vf610-calibration.c create mode 100644 arch/arm/mach-imx/ddrmc-vf610-calibration.h