Changes in v3: - update README fixing typo and removing Freescale document link - use debug() instead of printf() - be more explicit with hwmon error output and use macro for min/max percent - use #defines for GSC slave address and registers - remove extern from function prototype - moved gpio config into structure for better readability - use enum for eeprom bit configs and array to map to fdt property alias - add SATA regardless of cpu type - add FIT support regardless of flash type - display PMIC and device id in misc_init_r() instead of pmic driver
Changes in v2: - rebase on top of u-boot-imx - use switch..case for model specific init instead of strcmps - move checkboard to late init allowing i2c_setup to be moved to board_init() eeprom reading to be done after relocation, and move eeprom struct from data segment - move SPI/I2C init to board_init() - update README - remove unnecessary console overwrite function - fix multiline comment style and eliminate >80 char lines - eliminate unnecessary loop in board_mmc_init() - add missing copyright to clocks.cfg - avoid duplicating cfg files where no changes exist - added missing SPDX header to ventana_eeprom.h - use puts() instead of printf() for constant strings - remove messages regarding /dev/i2c-<n> - use get_ram_size() for determing ram_size - cleanup gpio configuration using tables for baseboard pinmux combinations - remove phy init errata as it doesn't pertain to use case (it is for 802.3az which IMX6 MAC does not support) - added pfuze100_pmic driver using PMIC API - moved GSC code (gsc command and i2c_read/i2c_write wrappers into own file) - allow user to quiet down some of the data displayed - remove display support for now - will revisit later - remove display of boot mode info - may revisit later - replace bitwise fields in eeprom structure with bit definitions
Tim Harvey (2): power: add PFUZE100 PMIC driver ventana: Add Gateworks Ventana family support
board/gateworks/gw_ventana/Makefile | 10 + board/gateworks/gw_ventana/README | 55 ++ board/gateworks/gw_ventana/clocks.cfg | 42 + board/gateworks/gw_ventana/gsc.c | 129 +++ board/gateworks/gw_ventana/gsc.h | 30 + board/gateworks/gw_ventana/gw_ventana.c | 1240 +++++++++++++++++++++++++++ board/gateworks/gw_ventana/gw_ventana.cfg | 42 + board/gateworks/gw_ventana/ventana_eeprom.h | 106 +++ boards.cfg | 5 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/pmic_pfuze100.c | 33 + include/configs/gw_ventana.h | 415 +++++++++ include/power/pfuze100_pmic.h | 96 +++ 13 files changed, 2204 insertions(+) create mode 100644 board/gateworks/gw_ventana/Makefile create mode 100644 board/gateworks/gw_ventana/README create mode 100644 board/gateworks/gw_ventana/clocks.cfg create mode 100644 board/gateworks/gw_ventana/gsc.c create mode 100644 board/gateworks/gw_ventana/gsc.h create mode 100644 board/gateworks/gw_ventana/gw_ventana.c create mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg create mode 100644 board/gateworks/gw_ventana/ventana_eeprom.h create mode 100644 drivers/power/pmic/pmic_pfuze100.c create mode 100644 include/configs/gw_ventana.h create mode 100644 include/power/pfuze100_pmic.h