OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board.
Remove it.
Patch-cc: Lucile Quirion lucile.quirion@savoirfairelinux.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/mach-imx/mx5/Kconfig | 5 - board/technologic/ts4800/Kconfig | 15 -- board/technologic/ts4800/MAINTAINERS | 6 - board/technologic/ts4800/Makefile | 5 - board/technologic/ts4800/ts4800.c | 262 --------------------------- board/technologic/ts4800/ts4800.h | 15 -- configs/ts4800_defconfig | 28 --- include/configs/ts4800.h | 139 -------------- 8 files changed, 475 deletions(-) delete mode 100644 board/technologic/ts4800/Kconfig delete mode 100644 board/technologic/ts4800/MAINTAINERS delete mode 100644 board/technologic/ts4800/Makefile delete mode 100644 board/technologic/ts4800/ts4800.c delete mode 100644 board/technologic/ts4800/ts4800.h delete mode 100644 configs/ts4800_defconfig delete mode 100644 include/configs/ts4800.h
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index dd21aea342..932283fbe3 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -71,10 +71,6 @@ config TARGET_MX53SMD bool "Support mx53smd" select MX53
-config TARGET_TS4800 - bool "Support TS4800" - select MX51 - config TARGET_USBARMORY bool "Support USB armory" select MX53 @@ -93,6 +89,5 @@ source "board/ge/mx53ppd/Kconfig" source "board/inversepath/usbarmory/Kconfig" source "board/k+p/kp_imx53/Kconfig" source "board/menlo/m53menlo/Kconfig" -source "board/technologic/ts4800/Kconfig"
endif diff --git a/board/technologic/ts4800/Kconfig b/board/technologic/ts4800/Kconfig deleted file mode 100644 index a28d5e41bd..0000000000 --- a/board/technologic/ts4800/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TS4800 - -config SYS_BOARD - default "ts4800" - -config SYS_VENDOR - default "technologic" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "ts4800" - -endif diff --git a/board/technologic/ts4800/MAINTAINERS b/board/technologic/ts4800/MAINTAINERS deleted file mode 100644 index e013ee42f8..0000000000 --- a/board/technologic/ts4800/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TS4800 BOARD -M: Lucile Quirion lucile.quirion@savoirfairelinux.com -S: Maintained -F: board/ts/ts4800/ -F: include/configs/ts4800.h -F: configs/ts4800_defconfig diff --git a/board/technologic/ts4800/Makefile b/board/technologic/ts4800/Makefile deleted file mode 100644 index ec33cf92ca..0000000000 --- a/board/technologic/ts4800/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2015 Savoir-faire Linux - -obj-y += ts4800.o diff --git a/board/technologic/ts4800/ts4800.c b/board/technologic/ts4800/ts4800.c deleted file mode 100644 index 28918de547..0000000000 --- a/board/technologic/ts4800/ts4800.c +++ /dev/null @@ -1,262 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2015 Savoir-faire Linux Inc. - * - * Derived from MX51EVK code by - * Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <init.h> -#include <log.h> -#include <net.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux-mx51.h> -#include <env.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/mach-imx/mx5_video.h> -#include <mmc.h> -#include <input.h> -#include <fsl_esdhc_imx.h> -#include <mc13892.h> - -#include <malloc.h> -#include <netdev.h> -#include <phy.h> -#include "ts4800.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_FSL_ESDHC_IMX -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR}, - {MMC_SDHC2_BASE_ADDR}, -}; -#endif - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -u32 get_board_rev(void) -{ - u32 rev = get_cpu_rev(); - if (!gpio_get_value(IMX_GPIO_NR(1, 22))) - rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET; - return rev; -} - -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH) - -static void setup_iomux_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, - PAD_CTL_HYS | - PAD_CTL_PUS_22K_UP | - PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), - MX51_PAD_EIM_EB3__FEC_RDATA1, - NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, PAD_CTL_HYS), - MX51_PAD_EIM_CS3__FEC_RDATA3, - MX51_PAD_NANDF_CS2__FEC_TX_ER, - MX51_PAD_EIM_CS5__FEC_CRS, - MX51_PAD_EIM_CS4__FEC_RX_ER, - /* PAD used on TS4800 */ - MX51_PAD_DI2_PIN2__FEC_MDC, - MX51_PAD_DISP2_DAT14__FEC_RDAT0, - MX51_PAD_DISP2_DAT10__FEC_COL, - MX51_PAD_DISP2_DAT11__FEC_RXCLK, - MX51_PAD_DISP2_DAT15__FEC_TDAT0, - MX51_PAD_DISP2_DAT6__FEC_TDAT1, - MX51_PAD_DISP2_DAT7__FEC_TDAT2, - MX51_PAD_DISP2_DAT8__FEC_TDAT3, - MX51_PAD_DISP2_DAT9__FEC_TX_EN, - MX51_PAD_DISP2_DAT13__FEC_TX_CLK, - MX51_PAD_DISP2_DAT12__FEC_RX_DV, - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -#ifdef CONFIG_FSL_ESDHC_IMX -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; - - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0, - NO_PAD_CTRL)); - gpio_direction_input(IMX_GPIO_NR(1, 0)); - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, - NO_PAD_CTRL)); - gpio_direction_input(IMX_GPIO_NR(1, 6)); - - if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(IMX_GPIO_NR(1, 0)); - else - ret = !gpio_get_value(IMX_GPIO_NR(1, 6)); - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX | - PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS), - NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS), - }; - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - - imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); - - return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); -} -#endif - -int board_early_init_f(void) -{ - setup_iomux_uart(); - setup_iomux_fec(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -/* - * Read the MAC address from FEC's registers PALR PAUR. - * User is supposed to configure these registers when MAC address is known - * from another source (fuse), but on TS4800, MAC address is not fused and - * the bootrom configure these registers on startup. - */ -static int fec_get_mac_from_register(uint32_t base_addr) -{ - unsigned char ethaddr[6]; - u32 reg_mac[2]; - int i; - - reg_mac[0] = in_be32(base_addr + 0xE4); - reg_mac[1] = in_be32(base_addr + 0xE8); - - for(i = 0; i < 6; i++) - ethaddr[i] = (reg_mac[i / 4] >> ((i % 4) * 8)) & 0xFF; - - if (is_valid_ethaddr(ethaddr)) { - eth_env_set_enetaddr("ethaddr", ethaddr); - return 0; - } - - return -1; -} - -#define TS4800_GPIO_FEC_PHY_RES IMX_GPIO_NR(2, 14) -int board_eth_init(bd_t *bd) -{ - int dev_id = -1; - int phy_id = 0xFF; - uint32_t addr = IMX_FEC_BASE; - - uint32_t base_mii; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - int ret; - - /* reset FEC phy */ - imx_iomux_v3_setup_pad(MX51_PAD_EIM_A20__GPIO2_14); - gpio_direction_output(TS4800_GPIO_FEC_PHY_RES, 0); - mdelay(1); - gpio_set_value(TS4800_GPIO_FEC_PHY_RES, 1); - mdelay(1); - - base_mii = addr; - debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr); - bus = fec_get_miibus(base_mii, dev_id); - if (!bus) - return -ENOMEM; - - phydev = phy_find_by_mask(bus, phy_id, PHY_INTERFACE_MODE_MII); - if (!phydev) { - free(bus); - return -ENOMEM; - } - - if (fec_get_mac_from_register(addr)) - printf("eth_init: failed to get MAC address\n"); - - ret = fec_probe(bd, dev_id, addr, bus, phydev); - if (ret) { - free(phydev); - free(bus); - } - - return ret; -} - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int checkboard(void) -{ - puts("Board: TS4800\n"); - - return 0; -} - -void hw_watchdog_reset(void) -{ - struct ts4800_wtd_regs *wtd = (struct ts4800_wtd_regs *) (TS4800_SYSCON_BASE + 0xE); - /* feed the watchdog for another 10s */ - writew(0x2, &wtd->feed); -} - -void hw_watchdog_init(void) -{ - return; -} diff --git a/board/technologic/ts4800/ts4800.h b/board/technologic/ts4800/ts4800.h deleted file mode 100644 index 25644f523a..0000000000 --- a/board/technologic/ts4800/ts4800.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015 Savoir-faire Linux Inc. - */ - -#ifndef _TS4800_H -#define _TS4800_H - -#define TS4800_SYSCON_BASE 0xb0010000 - -struct ts4800_wtd_regs { - u16 feed; -}; - -#endif diff --git a/configs/ts4800_defconfig b/configs/ts4800_defconfig deleted file mode 100644 index 810f0d8d88..0000000000 --- a/configs/ts4800_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX5=y -CONFIG_SYS_TEXT_BASE=0x90008000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x60000 -CONFIG_TARGET_TS4800=y -CONFIG_NR_DRAM_BANKS=1 -# CONFIG_CMD_BMODE is not set -CONFIG_BOOTDELAY=1 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC_IMX=y -CONFIG_MTD=y -CONFIG_PHYLIB=y -CONFIG_PHY_SMSC=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h deleted file mode 100644 index e563f3fe8a..0000000000 --- a/include/configs/ts4800.h +++ /dev/null @@ -1,139 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015, Savoir-faire Linux Inc. - * - * Derived from MX51EVK code by - * Guennadi Liakhovetski lg@denx.de - * Freescale Semiconductor, Inc. - * - * Configuration settings for the TS4800 Board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage bootloader */ - -#define CONFIG_HW_WATCHDOG - -#define CONFIG_MACH_TYPE MACH_TYPE_TS48XX - -/* text base address used when linking */ - -#include <asm/arch/imx-regs.h> - -/* enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* - * MMC Configs - * */ -#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR - -/* - * Eth Configs - */ - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE /* disable vendor parameters protection (serial#, ethaddr) */ - -/*********************************************************** - * Command definition - ***********************************************************/ - -/* Environment variables */ - - -#define CONFIG_LOADADDR 0x91000000 /* loadaddr env var */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "fdt_file=imx51-ts4800.dtb\0" \ - "fdt_addr=0x90fe0000\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ - "mmcargs=setenv bootargs root=${mmcroot}\0" \ - "addtty=setenv bootargs ${bootargs} console=ttymxc0,${baudrate}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs addtty; " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo ERR: cannot load FDT; " \ - "fi; " - - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi; " - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Low level init */ -#define CONFIG_SYS_DDR_CLKSEL 0 -#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 -#define CONFIG_SYS_MAIN_PWR_ON - -/*----------------------------------------------------------------------- - * Environment organization - */ - -#define CONFIG_SYS_MMC_ENV_DEV 0 - -#endif